BANANA BOAT PROTECTION PLUS VITAMINS SUNSCREEN UVA/UVB BORAD SPECTRUM SPF 30 · Octisalate, Avobenzone, Homosalate, Octocrylene

29 entries · the stored declaration is recorded as complete.

• Octisalate

  UV filter (filters UV rays)Light stabilizer (protects the formula from light)

  An organic UV filter that absorbs ultraviolet light, and doubles as a light stabilizer to keep the formula steady in sun. It also appears on labels as Ethylhexyl Salicylate.

• Avobenzone

  UV filter (filters UV rays)Light stabilizer (protects the formula from light)

  An organic UV filter that absorbs ultraviolet light. It also acts as a light stabilizer, helping the formula hold up under sun exposure. On labels it also appears as Butyl Methoxydibenzoylmethane.

• Homosalate

  UV filter (filters UV rays)Fragrance ingredient (scent)Restricted in the EU

  An organic UV filter that absorbs ultraviolet light. It also adds scent to the product.

• Octocrylene

  UV filter (filters UV rays)Light stabilizer (protects the formula from light)

  An organic UV filter that absorbs ultraviolet light. It also serves as a light stabilizer, helping keep other filters and the formula intact under sunlight.

• Water

  Antiplaque (CosIng functional class)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  The base liquid that most of the other ingredients dissolve or spread into. It carries the formula and helps condition the skin surface.

• Diisopropyl Adipate

  Emollient (softens and smooths skin)Fragrance ingredient (scent)Plasticizer (keeps a film flexible)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  An oily liquid that softens skin and acts as a solvent to dissolve other ingredients. It helps the product spread smoothly and can add to the scent.

• Niacinamide

  Smoothing (CosIng functional class)

  An ingredient that smooths the skin's surface. In practice, it helps the product leave skin feeling even.

• Cetearyl Alcohol

  Emollient (softens and smooths skin)Emulsion stabilizer (keeps oil and water mixed)Foam boosting (increases foam from other ingredients)Opacifier (makes the formula less see-through)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)Viscosity control (thickens or thins the formula)

  A workhorse ingredient that softens skin feel, adjusts thickness, helps oil and water mix, and keeps the blend stable. In practice it thickens the product, keeps it from separating, gives a smooth feel, and can make the product look opaque. Despite its name, it behaves like a waxy solid, not a drying alcohol.

• Phenoxyethanol

  Preservative (inhibits microbial growth)

  This is a preservative that fights microbes. It helps keep the product from spoiling over time.

• Carbomer

  Emulsion stabilizer (keeps oil and water mixed)Gel forming (sets the formula into a gel)Viscosity control (thickens or thins the formula)

  A thickener that adjusts how thick the product is and forms a gel. It also keeps oil and water blends from separating, holding the texture together.

• Benzyl Alcohol

  Fragrance ingredient (scent)Preservative (inhibits microbial growth)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)Restricted in the EU

  Benzyl Alcohol is a multi-tasking ingredient that acts as a preservative to keep the product from spoiling and as a solvent to dissolve other ingredients. It also adds scent and adjusts the thickness of the formula.

• Acrylates/C12-22 Alkyl Methacrylate Copolymer

  Film forming (leaves a thin coating)

  A large chain-like molecule that forms a film, leaving a thin even layer as the product dries.

• Glycerin

  Denaturant (makes alcohol undrinkable)Fragrance ingredient (scent)Hair conditioning (CosIng functional class)Humectant (holds moisture)Oral care (CosIng functional class)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

  Glycerin draws in and holds moisture while conditioning and protecting skin. It also dissolves other ingredients, adjusts thickness, and can add scent. On labels it may appear as glycerol.

• Ascorbyl Glucoside

  Antioxidant (slows the formula oxidizing)

  Ascorbyl Glucoside is a form of vitamin C used purely as an antioxidant. That means it helps keep the formula from spoiling as it's exposed to air.

• Chlorphenesin

  Preservative (inhibits microbial growth)

  This is a preservative that fights microbes. It helps keep the product from spoiling as bacteria and other organisms try to grow in it.

• Dicetyl Phosphate

  Surfactant (cleanses or mixes oil and water)

  A helper that lets oil and water mix into a stable blend and also lifts away dirt and oil. In practice it keeps the formula smooth and unified.

• Ceteth-10 Phosphate

  Surfactant (cleanses or mixes oil and water)

  Ceteth-10 Phosphate is a cleansing agent that lifts away dirt and oil. That helps the product loosen and carry away grime from the skin.

  listed as “Ceteth10 Phosphate”

• Coco-Glucoside

  Foaming (produces foam)Surfactant (cleanses or mixes oil and water)

  A cleansing agent that lifts away dirt and oil. It also creates foam and helps water rinse things off. On labels it's counted among the milder sugar-based cleansers.

  listed as “Coco Glucoside”

• Sodium Hydroxide

  Buffering (holds the formula at a set acidity)Denaturant (makes alcohol undrinkable)Restricted in the EU

  Sodium Hydroxide is a strongly alkaline ingredient used in tiny amounts to fine-tune a formula's acidity (buffering). This keeps the product's pH steady. It can also act as a denaturant, altering another substance so it stays fit for use in cosmetics rather than being consumed.

• Propylene Glycol

  Fragrance ingredient (scent)Humectant (holds moisture)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

  A multi-tasker that draws in and holds moisture, dissolves other ingredients as a solvent, and adjusts thickness. It also plays a role in fragrance and general skin conditioning. In practice it helps keep the product from drying out and keeps the texture consistent.

• Cocos Nucifera Oil

  Emollient (softens and smooths skin)Fragrance ingredient (scent)Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)

  This is coconut oil, used to soften and condition skin and hair. It smooths the feel of the product and adds scent. You may also see it listed simply as coconut oil.

  listed as “Cocos Nucifera (Coconut) Oil”

• Xanthan Gum

  Binder (holds the formula together)Emulsion stabilizer (keeps oil and water mixed)Gel forming (sets the formula into a gel)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)Viscosity control (thickens or thins the formula)

  A thickener that adjusts how thick the product is and forms a gel-like texture. It keeps oil and water mixed and stops the blend from separating, giving a stable, even feel.

• Disodium EDTA

  Chelating (binds metal ions in the formula)Viscosity control (thickens or thins the formula)

  An ingredient that binds trace metals that would otherwise spoil the formula, and helps adjust its thickness. This keeps the product stable over time.

• Camellia Sinensis Leaf Extract

  Antioxidant (slows the formula oxidizing)Astringent (CosIng functional class)Emollient (softens and smooths skin)Fragrance ingredient (scent)Humectant (holds moisture)Oral care (CosIng functional class)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)Tonic (CosIng functional class)UV absorber (protects the formula from light, not a sunscreen filter)

  An extract from tea leaves that does several jobs: it draws in and holds moisture, softens the skin, and works as an antioxidant. It also acts as an astringent and adds a mild scent. On labels this is the tea leaf extract.

• Parfum

  Fragrance ingredient (scent)

  This is the fragrance, a blend of scent ingredients added to give the product an odor or mask other smells. It's also listed as "aroma" on some labels.

  listed as “Fragrance”

• Mica

  Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Colorant (adds color)Opacifier (makes the formula less see-through)

  Mica is a mineral used to add color and to make the product look opaque rather than see-through. It also keeps powders from clumping and adds bulk to the formula.

• Tocopheryl Acetate

  Antioxidant (slows the formula oxidizing)Skin conditioning (CosIng functional class)

  Tocopheryl Acetate is a form of vitamin E that acts as an antioxidant, helping keep the formula from going off. It also conditions the skin, softening its feel.

• Titanium Dioxide

  UV filter (filters UV rays)Colorant (adds color)Opacifier (makes the formula less see-through)

  Titanium Dioxide is a mineral UV filter that absorbs ultraviolet light. It also works as a white colorant and opacifier, adding whiteness and making the product less see-through. As a color additive it appears on labels as CI 77891.

• Iron Oxides

  Colorant (adds color)

  A colorant that gives the product its shade. On labels it can also appear as CI 77491, CI 77492, or CI 77499.

Source

DailyMed drug label

Source record

https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=e53509bf-6bb7-2db7-e053-2a95a90aae18

Retrieved

27 July 2026

Market

United States

Version

v2 of this U.S. formulation

Source tier

Official label document (not independently verified by us)

Entries recorded

29

Record checksum

sha256:3ee6f5f6f1f2102360023d48e27c40b1abd9923a370adae184036c74f8f584c0