SPF Scout · Product record

cle de peau BEAUTE LONG-LASTING HYDRATING VEIL

Labeler: Shiseido Americas

SPF 21 as labeled

U.S. formulation · record last retrieved 21 September 2026

Quick facts

Does cle de peau BEAUTE LONG-LASTING HYDRATING VEIL list fragrance?

We cannot say whether fragrance is listed. The ingredient list stored for this record is not recorded as complete.

What are the active ingredients in cle de peau BEAUTE LONG-LASTING HYDRATING VEIL?

The ingredient list currently stored for this U.S. formulation names Titanium Dioxide, Avobenzone, Octinoxate, and Octocrylene among the sunscreen actives the FDA's monograph allows.

Is cle de peau BEAUTE LONG-LASTING HYDRATING VEIL mineral-only?

No. The ingredient list currently stored for this U.S. formulation names Avobenzone, Octinoxate, and Octocrylene.

Does cle de peau BEAUTE LONG-LASTING HYDRATING VEIL contain oxybenzone?

We cannot say whether oxybenzone is listed. The ingredient list stored for this record is not recorded as complete.

Each answer restates the ingredient list stored for this record. It does not predict whether your skin will react.

What is listed

The ingredient declaration stored for this formulation, reproduced exactly as it was recorded from the source below.

Avobenzone | Octinoxate | Octocrylene | Water | Butylene Glycol | Glycerin | Dimethicone | Talc | Methyl Methacrylate/Glycol Dimethacrylate Crosspolymer | Barium Sulfate | Peg/Ppg-19/19 Dimethicone | Hydrogenated Polyisobutene (1300 Mw) | Xylitol | Erythritol | Ppg-17 | Edetate Disodium | Trolamine | Peg-60 Glyceryl Isostearate | Methylparaben | Carbomer Homopolymer, Unspecified Type | Trehalose | Argan Oil | Silicon Dioxide | Carbomer Interpolymer Type A (Allyl Sucrose Crosslinked) | Sodium Polymetaphosphate | Butylated Hydroxytoluene | Xanthan Gum | .Alpha.-Tocopherol | Sodium Citrate, Unspecified Form | Sodium Metabisulfite | Polyquaternium-51 (2-Methacryloyloxyethyl Phosphorylcholine/N-Butyl Methacrylate; 3:7) | Ferric Oxide Red | Ferric Oxide Yellow | Ferrosoferric Oxide | Glycine | Theanine | Peg/Ppg-14/7 Dimethyl Ether | Phenoxyethanol | Titanium Dioxide | Citric Acid Monohydrate | Trimethylsiloxysilicate (M/Q 0.6-0.8) | Rosa Roxburghii Fruit | Mica | Angelica Acutiloba Root | Polymethylsilsesquioxane (4.5 Microns) | Dimethicone/Vinyl Dimethicone Crosspolymer (Soft Particle) | Perilla Frutescens Leaf | Aluminum Hydroxide | Triethoxycaprylylsilane

49 entries · the stored declaration is recorded as incomplete. An incomplete list is treated as unknown, never as a pass.

What each ingredient generally does

Each entry that matched a canonical ingredient, with the function recorded for it. These notes describe the role an ingredient plays in a formulation. They do not assess an ingredient.

  • Avobenzone

    UV filter (filters UV rays)Light stabilizer (protects the formula from light)

    An organic UV filter that absorbs ultraviolet light. It also acts as a light stabilizer, helping the formula hold up under sun exposure. On labels it also appears as Butyl Methoxydibenzoylmethane.

  • Octinoxate

    UV filter (filters UV rays)Light stabilizer (protects the formula from light)

    An organic UV filter that absorbs ultraviolet light. It also acts as a light stabilizer, helping the formula hold up when exposed to sunlight. You'll often see it listed as Ethylhexyl Methoxycinnamate.

  • Octocrylene

    UV filter (filters UV rays)Light stabilizer (protects the formula from light)

    An organic UV filter that absorbs ultraviolet light. It also serves as a light stabilizer, helping keep other filters and the formula intact under sunlight.

  • Water

    Antiplaque (CosIng functional class)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

    The base liquid that most of the other ingredients dissolve or spread into. It carries the formula and helps condition the skin surface.

  • Butylene Glycol

    Fragrance ingredient (scent)Humectant (holds moisture)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

    A multitasking liquid that acts as a humectant, solvent, and thickness adjuster, and carries a scent role. It draws in and holds moisture, dissolves other ingredients, and helps set the product's texture.

  • Glycerin

    Denaturant (makes alcohol undrinkable)Fragrance ingredient (scent)Hair conditioning (CosIng functional class)Humectant (holds moisture)Oral care (CosIng functional class)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

    Glycerin draws in and holds moisture while conditioning and protecting skin. It also dissolves other ingredients, adjusts thickness, and can add scent. On labels it may appear as glycerol.

  • Dimethicone

    Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)

    A silicone that softens and smooths skin feel and forms a protective layer on the surface. It also cuts down foam during production, keeping the formula settled.

  • Talc

    Abrasive (physically scrubs)Absorbent (takes up oil or water)Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Opacifier (makes the formula less see-through)Skin protecting (CosIng functional class)Slip modifier (changes how the formula spreads)Restricted in the EU

    Talc is a soft mineral powder that absorbs moisture and adds bulk and slip. In practice it helps the product spread, keeps powders from clumping, and can add opacity.

  • Methyl Methacrylate/Glycol Dimethacrylate Crosspolymer

    Film forming (leaves a thin coating)

    This is a film former. It leaves a thin, even layer on the skin as the product dries.

  • Barium Sulfate

    Colorant (adds color)Opacifier (makes the formula less see-through)

    This is a mineral powder used as a colorant and opacifier. It adds color and makes the product look less see-through. On labels it may also appear as CI 77120.

  • Peg/Ppg-19/19 Dimethicone

    Surfactant (cleanses or mixes oil and water)

    A silicone-based helper that lets oil and water mix. It keeps the oily and watery parts of the product blended into one smooth formula.

  • No general role is recorded for this ingredient in the inventory we hold. That is a gap in our record, not a statement about the ingredient.

    listed as “Hydrogenated Polyisobutene (1300 Mw)”

  • Xylitol

    Anti-seborrheic (CosIng functional class)Deodorant (masks or reduces odor)Flavoring (adds taste)Humectant (holds moisture)Skin conditioning (CosIng functional class)

    A humectant, meaning it draws in and holds moisture. This helps keep the skin and the formula from drying out, and it also acts as a deodorant.

  • Erythritol

    Humectant (holds moisture)Moisturizing (CosIng functional class)Skin conditioning (CosIng functional class)

    A sugar-like ingredient that draws in and holds moisture. That keeps the formula and skin from drying out and leaves skin feeling conditioned.

  • Ppg-17

    Skin conditioning (CosIng functional class)

    This is a skin-conditioning agent that improves the feel and condition of the skin. That is its role in the formula.

  • Disodium EDTA

    Chelating (binds metal ions in the formula)Viscosity control (thickens or thins the formula)

    An ingredient that binds trace metals that would otherwise spoil the formula, and helps adjust its thickness. This keeps the product stable over time.

    listed as “Edetate Disodium”

  • Triethanolamine

    Buffering (holds the formula at a set acidity)Fragrance ingredient (scent)Surfactant (cleanses or mixes oil and water)Restricted in the EU

    A buffering agent that sets and steadies the product's acidity level. It also helps oil and water mix, aids cleansing, and contributes to fragrance.

    listed as “Trolamine”

  • Peg-60 Glyceryl Isostearate

    Surfactant (cleanses or mixes oil and water)

    A cleansing agent. It helps lift away oils and dirt from the skin.

  • Methylparaben

    Fragrance ingredient (scent)Preservative (inhibits microbial growth)

    This is a preservative that also adds fragrance. It keeps the product from spoiling and contributes to its scent. It belongs to the paraben family of preservatives.

  • Carbomer

    Emulsion stabilizer (keeps oil and water mixed)Gel forming (sets the formula into a gel)Viscosity control (thickens or thins the formula)

    A thickener that adjusts how thick the product is and forms a gel. It also keeps oil and water blends from separating, holding the texture together.

    listed as “Carbomer Homopolymer, Unspecified Type”

  • Trehalose

    Humectant (holds moisture)Moisturizing (CosIng functional class)

    Trehalose is a sugar used as a humectant, meaning it draws in and holds moisture. That keeps skin and the formula from drying out.

  • Argania Spinosa Kernel Oil

    Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)

    Argan oil, used as a skin conditioner and emollient. It softens and smooths skin feel and helps keep skin in good condition.

    listed as “Argan Oil”

  • Silica

    Abrasive (physically scrubs)Absorbent (takes up oil or water)Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Opacifier (makes the formula less see-through)Viscosity control (thickens or thins the formula)

    Silica is a fine mineral powder that soaks up excess moisture and oil, and adjusts how thick the product feels. It keeps powders from clumping, adds bulk, and can make a formula look more opaque. Its chemical name is silicon dioxide.

    listed as “Silicon Dioxide”

  • No reviewed note yet.

  • Sodium Hexametaphosphate

    Anticorrosive (protects the container and equipment from corrosion)Chelating (binds metal ions in the formula)Fragrance ingredient (scent)

    This binds trace metals that would otherwise spoil the formula, and helps guard against corrosion. It also adds to the product's scent.

    listed as “Sodium Polymetaphosphate”

  • Butylated Hydroxytoluene

    Antioxidant (slows the formula oxidizing)Fragrance ingredient (scent)Restricted in the EU

    An antioxidant that also adds a scent note. It helps keep the oils in the formula from going off, so the product stays stable longer. Often shortened to BHT on labels.

  • Xanthan Gum

    Binder (holds the formula together)Emulsion stabilizer (keeps oil and water mixed)Gel forming (sets the formula into a gel)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)Viscosity control (thickens or thins the formula)

    A thickener that adjusts how thick the product is and forms a gel-like texture. It keeps oil and water mixed and stops the blend from separating, giving a stable, even feel.

  • Tocopherol

    Antioxidant (slows the formula oxidizing)Fragrance ingredient (scent)Occlusive (CosIng functional class)Skin conditioning (CosIng functional class)

    Tocopherol is a form of vitamin E used as an antioxidant, which helps keep the formula from going off. It also conditions skin and forms a thin surface layer that slows moisture loss. You may see it listed simply as vitamin E.

    listed as “.Alpha.-Tocopherol”

  • Sodium Citrate

    Buffering (holds the formula at a set acidity)Chelating (binds metal ions in the formula)Fragrance ingredient (scent)

    A buffering agent that keeps the product's acidity steady. It also binds trace metals that would otherwise spoil the formula.

    listed as “Sodium Citrate, Unspecified Form”

  • Sodium Metabisulfite

    Antioxidant (slows the formula oxidizing)Preservative (inhibits microbial growth)Reducing agent (chemically reduces other ingredients)Restricted in the EU

    This works as an antioxidant, a preservative, and a reducing agent. In practice, it helps slow down spoilage and keeps the formula stable over time.

  • Polyquaternium-51

    Film forming (leaves a thin coating)Skin conditioning (CosIng functional class)

    This does two jobs: it forms a thin film on the skin and conditions it. That means it lays down a smooth even layer while helping skin feel soft.

    listed as “Polyquaternium-51 (2-Methacryloyloxyethyl Phosphorylcholine/N-Butyl Methacrylate; 3:7)”

  • Iron Oxides

    Colorant (adds color)

    A colorant that gives the product its shade. On labels it can also appear as CI 77491, CI 77492, or CI 77499.

    listed as “Ferric Oxide Red”

  • Iron Oxides

    Colorant (adds color)

    A colorant that gives the product its shade. On labels it can also appear as CI 77491, CI 77492, or CI 77499.

    listed as “Ferric Oxide Yellow”

  • Ferrosoferric Oxide

    Colorant (adds color)

    This is a mineral colorant used to tint the product. On labels it's often grouped under Iron Oxides and appears as CI 77499.

  • Glycine

    Antistatic (reduces static)Buffering (holds the formula at a set acidity)Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)

    Glycine is a skin and hair conditioner that also buffers, meaning it helps keep the product's acidity steady. It has an antistatic effect too, reducing static in hair.

  • Theanine

    Emollient (softens and smooths skin)Humectant (holds moisture)Skin conditioning (CosIng functional class)

    This ingredient draws in and holds moisture while conditioning and softening the skin. In practice it helps keep the product from drying out skin and smooths its feel.

  • Peg/Ppg-14/7 Dimethyl Ether

    Skin conditioning (CosIng functional class)

    This is a skin-conditioning ingredient. It works on the surface of the skin to improve how the product feels.

  • Phenoxyethanol

    Preservative (inhibits microbial growth)

    This is a preservative that fights microbes. It helps keep the product from spoiling over time.

  • Titanium Dioxide

    UV filter (filters UV rays)Colorant (adds color)Opacifier (makes the formula less see-through)

    Titanium Dioxide is a mineral UV filter that absorbs ultraviolet light. It also works as a white colorant and opacifier, adding whiteness and making the product less see-through. As a color additive it appears on labels as CI 77891.

  • Citric Acid

    Buffering (holds the formula at a set acidity)Chelating (binds metal ions in the formula)Fragrance ingredient (scent)

    Citric Acid is a mild acid used to fine-tune a formula's pH. It keeps the acidity steady (buffering), binds trace metals that would spoil the formula (chelating), and can add a scent note.

    listed as “Citric Acid Monohydrate”

  • Trimethylsiloxysilicate

    Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)

    A silicone-based ingredient that conditions and softens skin. It also cuts down foaming during mixing, keeping the formula from getting bubbly.

    listed as “Trimethylsiloxysilicate (M/Q 0.6-0.8)”

  • Rosa Roxburghii Fruit Extract

    Tonic (CosIng functional class)

    An extract from the fruit of Rosa roxburghii, used as a tonic. It gives skin a refreshed, toned feel.

    listed as “Rosa Roxburghii Fruit”

  • Mica

    Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Colorant (adds color)Opacifier (makes the formula less see-through)

    Mica is a mineral used to add color and to make the product look opaque rather than see-through. It also keeps powders from clumping and adds bulk to the formula.

  • Angelica Acutiloba Root

    Skin conditioning (CosIng functional class)

    A root-based ingredient used to condition the skin, helping it feel softer and smoother.

  • Polymethylsilsesquioxane

    Opacifier (makes the formula less see-through)

    This is an opacifier, meaning it makes the product look less see-through. It gives the formula a more solid, opaque appearance.

    listed as “Polymethylsilsesquioxane (4.5 Microns)”

  • Dimethicone/Vinyl Dimethicone Crosspolymer

    Skin conditioning (CosIng functional class)Viscosity control (thickens or thins the formula)

    A silicone elastomer that softens and smooths skin feel and adjusts the thickness of the product. In practice it gives a silky, cushioned texture.

    listed as “Dimethicone/Vinyl Dimethicone Crosspolymer (Soft Particle)”

  • No reviewed note yet.

  • Aluminum Hydroxide

    Emollient (softens and smooths skin)Humectant (holds moisture)Opacifier (makes the formula less see-through)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)Viscosity control (thickens or thins the formula)

    A mineral ingredient that draws in and holds moisture, softens skin feel, and adjusts the product's thickness. It also adds opacity and forms a protective layer on the skin's surface.

  • Triethoxycaprylylsilane

    Binder (holds the formula together)

    A binding ingredient that helps hold the parts of the formula together. It is often used to coat and bind powders in a mix.

Checking this against your own list

SPF Scout's Personal Ingredient Check runs in the app, on your device. This page cannot see a personal avoidance list. Your selections are stored on your phone and are never sent to this website. There is nowhere on our side for them to go.

In the app you choose the ingredients you already avoid, and every entry in this declaration that matches one of them is shown to you with the alias path that produced the match.

This comparison does not predict whether your skin will react.

Source quality

Source
DailyMed drug label
Source record
https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=f04ece6c-66b6-48e9-8f6b-e898a538ba00
Retrieved
21 September 2026
Market
United States
Version
v1 of this U.S. formulation
Source tier
Official label document (not independently verified by us)
Entries recorded
49
Record checksum
sha256:5f517a82d2b19f3a55bdc5a8685b0d8c293150180f2598fc6c949968ccb76932

Always compare this record with your current package.

Report an incorrect formulation