PML NYC, LLC TRACELESS MINERAL BROAD SPECTRUM SPF SUNSCREEN AND PRIMER

30 entries · the stored declaration is recorded as complete.

• Zinc Oxide

  Bulking agent (adds volume)Colorant (adds colour)Light stabiliser (protects the formula from light)Oral care (CosIng functional class)Preservative (inhibits microbial growth)Skin protecting (CosIng functional class)UV absorber (protects the formula from light, not a sunscreen filter)UV filter (filters UV rays)

  A mineral UV filter that absorbs ultraviolet light, the core sun-protection job in this product. It also helps protect the skin surface and can add whiteness or opacity. On some labels it appears as CI 77947 when used for colour.

• Water

  Antiplaque (CosIng functional class)otherSkin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  The base liquid that most of the other ingredients dissolve or spread into. It carries the formula and helps condition the skin surface.

• C12-15 Alkyl Benzoate

  Emollient (softens and smooths skin)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)

  This is a lightweight oily ingredient that softens and smooths the skin. It also helps keep the product fresh by limiting microbe growth.

• Dimethicone

  Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)

  A silicone that softens and smooths skin feel and forms a protective layer on the surface. It also cuts down foam during production, keeping the formula settled.

• Argania Spinosa Kernel Oil

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)

  Argan oil, used as a skin conditioner and emollient. It softens and smooths skin feel and helps keep skin in good condition.

• Tocopheryl Acetate

  Antioxidant (slows the formula oxidising)otherSkin conditioning (CosIng functional class)

  Tocopheryl Acetate is a form of vitamin E that acts as an antioxidant, helping keep the formula from going off. It also conditions the skin, softening its feel.

• Cetearyl Alcohol

  Emollient (softens and smooths skin)Emulsion stabiliser (keeps oil and water mixed)Foam boosting (increases foam from other ingredients)Opacifier (makes the formula less see-through)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)Viscosity control (thickens or thins the formula)

  A workhorse ingredient that softens skin feel, adjusts thickness, helps oil and water mix, and keeps the blend stable. In practice it thickens the product, keeps it from separating, gives a smooth feel, and can make the product look opaque. Despite its name, it behaves like a waxy solid, not a drying alcohol.

• Propanediol

  Humectant (holds moisture)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

  A solvent that dissolves other ingredients and helps them blend evenly. It also adjusts the thickness of the formula.

• Niacinamide

  otherSmoothing (CosIng functional class)

  An ingredient that smooths the skin's surface. In practice, it helps the product leave skin feeling even.

• Polyhydroxystearic Acid

  Surfactant (cleanses or mixes oil and water)

  This is an emulsifier that helps oil and water mix. It keeps the oily and watery parts blended so the formula holds together.

• Coco-Glucoside

  Foaming (produces foam)Surfactant (cleanses or mixes oil and water)

  A cleansing agent that lifts away dirt and oil. It also creates foam and helps water rinse things off. On labels it's counted among the milder sugar-based cleansers.

• Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

  Anticaking (keeps powder free-flowing)Emulsion stabiliser (keeps oil and water mixed)Film forming (leaves a thin coating)Opacifier (makes the formula less see-through)Viscosity control (thickens or thins the formula)

  A copolymer that thickens the formula, keeps the oil and water parts from separating, and forms a film as it dries. It also helps make the product look opaque and stops it from caking. In short, it sets the texture and holds the mix together.

• Glyceryl Stearate

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

  Glyceryl Stearate is an emollient that softens and smooths skin feel. It also acts as an emulsifier, keeping the oil and water parts blended together.

• PEG-100 Stearate

  Surfactant (cleanses or mixes oil and water)

  A cleansing surfactant, meaning it helps lift away oil and dirt. It's often paired with other emulsifiers in creams.

• Silica

  Abrasive (physically scrubs)Absorbent (takes up oil or water)Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Opacifier (makes the formula less see-through)otherViscosity control (thickens or thins the formula)

  Silica is a fine mineral powder that soaks up excess moisture and oil, and adjusts how thick the product feels. It keeps powders from clumping, adds bulk, and can make a formula look more opaque. Its chemical name is silicon dioxide.

• Isohexadecane

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  A light oil-like ingredient that works as a solvent, keeping other ingredients dissolved and mixed. It also softens and smooths skin feel, helping the product glide on.

• Pongamia Pinnata Seed Extract

  Skin conditioning (CosIng functional class)

  A seed extract used as a skin conditioner. It helps keep skin feeling soft and smooth.

• Xanthan Gum

  Binder (holds the formula together)Emulsion stabiliser (keeps oil and water mixed)Gel forming (sets the formula into a gel)otherSkin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)Viscosity control (thickens or thins the formula)

  A thickener that adjusts how thick the product is and forms a gel-like texture. It keeps oil and water mixed and stops the blend from separating, giving a stable, even feel.

• Bisabolol

  Fragrance ingredient (scent)otherSkin conditioning (CosIng functional class)Soothing (CosIng functional class)

  A conditioning and soothing ingredient that also adds a light fragrance. It softens the skin's feel and contributes scent to the product. On labels it may also appear as Levomenol.

• Citric Acid

  Buffering (holds the formula at a set acidity)Chelating (binds metal ions in the formula)Fragrance ingredient (scent)other

  Citric Acid is a mild acid used to fine-tune a formula's pH. It keeps the acidity steady (buffering), binds trace metals that would spoil the formula (chelating), and can add a scent note.

• Hydroxyacetophenone

  Antioxidant (slows the formula oxidising)other

  An antioxidant that helps keep the formula from going off over time. In practice it protects the product's other ingredients from breaking down.

• Triethoxycaprylylsilane

  Binder (holds the formula together)other

  A binding ingredient that helps hold the parts of the formula together. It is often used to coat and bind powders in a mix.

• Polysorbate 80

  Denaturant (makes alcohol undrinkable)Surfactant (cleanses or mixes oil and water)

  Polysorbate 80 helps oil and water blend and stay mixed, and works as a cleansing agent too. It also acts as a denaturant, an additive that makes any alcohol in the formula unpalatable.

• Polysilicone-11

  Film forming (leaves a thin coating)

  This is a film former, a silicone-based ingredient. It leaves a thin, even layer on the skin as the product dries down.

• Ethylhexylglycerin

  Deodorant (masks or reduces odour)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)

  A multi-tasker that conditions the skin and works as a deodorant agent. It helps improve skin feel while cutting odor.

• Trisodium Ethylenediamine Disuccinate

  Chelating (binds metal ions in the formula)other

  This is a chelating agent. It binds trace metals in the mix that could break the formula down over time.

• Sodium Hydroxide

  Buffering (holds the formula at a set acidity)Denaturant (makes alcohol undrinkable)other

  Sodium Hydroxide is a strongly alkaline ingredient used in tiny amounts to fine-tune a formula's acidity (buffering). This keeps the product's pH steady. It can also act as a denaturant, altering another substance so it stays fit for use in cosmetics rather than being consumed.

• Phenoxyethanol

  Preservative (inhibits microbial growth)

  This is a preservative that fights microbes. It helps keep the product from spoiling over time.

• CI 19140

  Colorant (adds colour)Hair dyeing (colours hair)

  CI 19140 is a yellow color used to shade the product. It's a colorant and can also be used to dye hair. You may see it listed as Tartrazine.

  listed as “Yellow 5”

• Red 40

  other

  No reviewed note yet.

Source

DailyMed drug label

Source record

https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=1c2e9b0d-ba0e-1767-e063-6394a90a756c

Retrieved

21 September 2026

Market

United States

Version

v1 of this U.S. formulation

Source tier

Official label document (not independently verified by us)

Entries recorded

30

Record checksum

sha256:6f565948720a128387c3114d192a9b95c55df670b2c71dd9f1040b51dcf913d0