Lancôme Lancome Paris Teint Idole Ultra Wear Care and Glow Skincare Foundation Broad Spectrum SPF 27 Sunscreen

54 entries · the stored declaration is recorded as complete.

• Ensulizole

  UV filter (filters UV rays)Light stabilizer (protects the formula from light)

  Ensulizole is an organic UV filter that absorbs ultraviolet light, so less of it reaches the skin. It also acts as a light stabilizer, helping the formula hold up under sun exposure. You may see it listed as Phenylbenzimidazole Sulfonic Acid.

• Dimethicone

  Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)

  A silicone that softens and smooths skin feel and forms a protective layer on the surface. It also cuts down foam during production, keeping the formula settled.

• Water

  Antiplaque (CosIng functional class)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  The base liquid that most of the other ingredients dissolve or spread into. It carries the formula and helps condition the skin surface.

• Isododecane

  Emollient (softens and smooths skin)Fragrance ingredient (scent)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  A light fluid that acts as a solvent, keeping other ingredients dissolved and evenly blended. It also softens skin feel and can carry fragrance. It leaves a quick, non-heavy finish as it spreads.

• Alcohol Denat.

  Antifoaming (stops the formula foaming)Astringent (CosIng functional class)Fragrance ingredient (scent)Preservative (inhibits microbial growth)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

  Alcohol Denat. is ethyl alcohol with additives that make it undrinkable, used as a solvent to dissolve ingredients and thin the formula. It also cuts foam, tightens skin as an astringent, and adjusts thickness. Denat. simply means it has been denatured.

  listed as “alcohol denat”

• Trimethylsiloxysilicate

  Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)

  A silicone-based ingredient that conditions and softens skin. It also cuts down foaming during mixing, keeping the formula from getting bubbly.

• Propylene Glycol

  Fragrance ingredient (scent)Humectant (holds moisture)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

  A multi-tasker that draws in and holds moisture, dissolves other ingredients as a solvent, and adjusts thickness. It also plays a role in fragrance and general skin conditioning. In practice it helps keep the product from drying out and keeps the texture consistent.

• Glycerin

  Denaturant (makes alcohol undrinkable)Fragrance ingredient (scent)Hair conditioning (CosIng functional class)Humectant (holds moisture)Oral care (CosIng functional class)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

  Glycerin draws in and holds moisture while conditioning and protecting skin. It also dissolves other ingredients, adjusts thickness, and can add scent. On labels it may appear as glycerol.

• PEG/PPG-18/18 Dimethicone

  Surfactant (cleanses or mixes oil and water)

  A silicone-based emulsifier that helps oil and water mix. This keeps the watery and oily parts of the product blended into one smooth, stable formula.

• Silica

  Abrasive (physically scrubs)Absorbent (takes up oil or water)Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Opacifier (makes the formula less see-through)Viscosity control (thickens or thins the formula)

  Silica is a fine mineral powder that soaks up excess moisture and oil, and adjusts how thick the product feels. It keeps powders from clumping, adds bulk, and can make a formula look more opaque. Its chemical name is silicon dioxide.

• Synthetic Fluorphlogopite

  Bulking agent (adds volume)Viscosity control (thickens or thins the formula)

  A mineral ingredient that adds bulk and adjusts the product's thickness. This helps give the formula its texture and body.

• Polysilicone-11

  Film forming (leaves a thin coating)

  This is a film former, a silicone-based ingredient. It leaves a thin, even layer on the skin as the product dries down.

• Moringa Oleifera Seed Extract

  Skin conditioning (CosIng functional class)

  An extract from moringa seeds used as a skin conditioner. It helps keep skin feeling soft and smooth.

• Polymnia Sonchifolia Root Juice

  Skin conditioning (CosIng functional class)

  This is a skin-conditioning ingredient, the juice pressed from yacon roots. It helps keep skin feeling soft and conditioned.

• Sorbitol

  Fragrance ingredient (scent)Humectant (holds moisture)Skin conditioning (CosIng functional class)

  A humectant that draws in and holds moisture, so it keeps the product from drying out and conditions the skin. It also acts as a fragrance component, adding to the product's scent.

• Mandelic Acid

  Preservative (inhibits microbial growth)

  An antimicrobial ingredient that helps keep microbes in check. This helps the product stay fresh in the container.

• PEG-10 Dimethicone

  Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)

  A silicone-based ingredient that conditions skin and hair. In practice it helps leave a smooth, soft feel.

• Alpha-Glucan Oligosaccharide

  Skin conditioning (CosIng functional class)Smoothing (CosIng functional class)Surfactant (cleanses or mixes oil and water)

  A sugar-based ingredient that conditions and smooths the skin, and can also work as a cleansing agent. In practice it helps the product leave skin feeling smooth and soft.

• Sodium Chloride

  Bulking agent (adds volume)Fragrance ingredient (scent)Oral care (CosIng functional class)Viscosity control (thickens or thins the formula)

  Common table salt, used here mainly to adjust the thickness of the formula. It can also act as a bulking agent to add body, and shows up in oral care products. On labels it's simply salt.

• Sodium Hyaluronate

  Humectant (holds moisture)Skin conditioning (CosIng functional class)

  A moisture-grabbing ingredient that draws in and holds water. That keeps skin conditioned and helps it feel supple. It's the salt form of hyaluronic acid.

• Sodium Hydroxide

  Buffering (holds the formula at a set acidity)Denaturant (makes alcohol undrinkable)Restricted in the EU

  Sodium Hydroxide is a strongly alkaline ingredient used in tiny amounts to fine-tune a formula's acidity (buffering). This keeps the product's pH steady. It can also act as a denaturant, altering another substance so it stays fit for use in cosmetics rather than being consumed.

• Silica Silylate

  Anticaking (keeps powder free-flowing)Antifoaming (stops the formula foaming)Bulking agent (adds volume)Emollient (softens and smooths skin)Emulsion stabilizer (keeps oil and water mixed)Skin conditioning (CosIng functional class)Viscosity control (thickens or thins the formula)

  A treated silica powder that helps hold the mix together, adjusts thickness, and adds bulk. It softens skin feel, reduces foaming, and keeps powders free-flowing.

• Cellulose Acetate Butyrate

  Film forming (leaves a thin coating)

  This is a cellulose-based film former. It leaves a thin, even layer on the skin as the product sets.

• Aluminum Hydroxide

  Emollient (softens and smooths skin)Humectant (holds moisture)Opacifier (makes the formula less see-through)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)Viscosity control (thickens or thins the formula)

  A mineral ingredient that draws in and holds moisture, softens skin feel, and adjusts the product's thickness. It also adds opacity and forms a protective layer on the skin's surface.

• Ammonium Polyacryloyldimethyl Taurate

  Emulsion stabilizer (keeps oil and water mixed)Viscosity control (thickens or thins the formula)

  A polymer that helps structure the formula. It keeps the oil and water parts mixed and adjusts the thickness so the product has the right texture.

• Disodium Phosphate

  Anticorrosive (protects the container and equipment from corrosion)Buffering (holds the formula at a set acidity)Fragrance ingredient (scent)

  A buffering ingredient that keeps the product's acidity steady over time. It also guards against corrosion and can add to the scent.

• Disodium Stearoyl Glutamate

  Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

  A cleansing agent that helps oil and water mix and lifts away dirt. It also conditions skin and hair, leaving a softer feel.

• Hydroxyethylpiperazine Ethane Sulfonic Acid

  Buffering (holds the formula at a set acidity)

  This is a buffering ingredient. It keeps the product's acidity steady so the formula stays balanced. On labels it may appear under its short name, HEPES.

• Caprylyl Glycol

  Deodorant (masks or reduces odor)Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)

  A multi-tasker that conditions skin and hair and acts as a deodorant. As an emollient it softens and smooths, leaving skin feeling conditioned.

• Citric Acid

  Buffering (holds the formula at a set acidity)Chelating (binds metal ions in the formula)Fragrance ingredient (scent)

  Citric Acid is a mild acid used to fine-tune a formula's pH. It keeps the acidity steady (buffering), binds trace metals that would spoil the formula (chelating), and can add a scent note.

• Lactobacillus

  Skin conditioning (CosIng functional class)

  Lactobacillus is a microorganism used here as a skin-conditioning ingredient. In practice it helps the product leave skin feeling soft and smooth.

• Maltodextrin

  Absorbent (takes up oil or water)Binder (holds the formula together)Emulsion stabilizer (keeps oil and water mixed)Film forming (leaves a thin coating)Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)

  Maltodextrin is a multitasking carbohydrate. It soaks up excess liquid, holds ingredients together, keeps the oil-and-water mix stable, and forms a thin film while conditioning skin and hair.

• Polyphosphorylcholine Glycol Acrylate

  Film forming (leaves a thin coating)

  This is a film-forming ingredient that leaves a thin, even layer on the skin as the product dries. That coating helps the other ingredients stay put where you applied them.

• Polyvinyl Alcohol

  Film forming (leaves a thin coating)Viscosity control (thickens or thins the formula)

  Polyvinyl Alcohol forms a thin film as the product dries, leaving an even layer on the skin. It also adjusts the thickness of the formula.

• Butylene Glycol

  Fragrance ingredient (scent)Humectant (holds moisture)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

  A multitasking liquid that acts as a humectant, solvent, and thickness adjuster, and carries a scent role. It draws in and holds moisture, dissolves other ingredients, and helps set the product's texture.

• Tocopherol

  Antioxidant (slows the formula oxidizing)Fragrance ingredient (scent)Occlusive (CosIng functional class)Skin conditioning (CosIng functional class)

  Tocopherol is a form of vitamin E used as an antioxidant, which helps keep the formula from going off. It also conditions skin and forms a thin surface layer that slows moisture loss. You may see it listed simply as vitamin E.

• Phenoxyethanol

  Preservative (inhibits microbial growth)

  This is a preservative that fights microbes. It helps keep the product from spoiling over time.

• Parfum

  Fragrance ingredient (scent)

  This is the fragrance, a blend of scent ingredients added to give the product an odor or mask other smells. It's also listed as "aroma" on some labels.

  listed as “fragrance”

• Pelargonium Graveolens Flower Oil

  Fragrance ingredient (scent)Restricted in the EU

  An oil from Bourbon geranium flowers used as a fragrance. Its job is to give the product a scent.

• Linalool

  Deodorant (masks or reduces odor)Fragrance ingredient (scent)Restricted in the EU

  Linalool is used mainly for fragrance and as a deodorant that adjusts the product's smell. Its job is to shape how the product scents.

• Geraniol

  Fragrance ingredient (scent)Tonic (CosIng functional class)Restricted in the EU

  Geraniol is a fragrance ingredient that gives the product its scent. It also acts as a tonic, adding a fresh feel.

• Pinene

  Antifoaming (stops the formula foaming)Fragrance ingredient (scent)Restricted in the EU

  This works as a fragrance, adding scent to the product. It can also act as an antifoaming agent, keeping unwanted foam down during use or making.

• Rose Flower Oil/Extract

  Fragrance ingredient (scent)

  A rose flower oil and extract blend used as a fragrance. It gives the product its scent.

• Trimethylcyclopentenyl Methylisopentenol

  Fragrance ingredient (scent)

  A fragrance ingredient. Its job is to give the product a scent.

• Limonene

  Deodorant (masks or reduces odor)Fragrance ingredient (scent)Solvent (dissolves other ingredients)Restricted in the EU

  Limonene works as a scent ingredient and a solvent that helps dissolve other ingredients. It also acts as a deodorant, masking or adjusting odor in the formula.

• Citral

  Flavoring (adds taste)Fragrance ingredient (scent)Restricted in the EU

  Citral is a fragrance and flavoring ingredient that gives the product its scent. It carries a lemony smell and is a common part of perfume blends.

• Tetramethyl Acetyloctahydronaphthalenes

  Fragrance ingredient (scent)Skin conditioning (CosIng functional class)Restricted in the EU

  This is a fragrance ingredient that also conditions skin. It scents the product and helps it feel smooth on skin.

• Citronellol

  Fragrance ingredient (scent)Restricted in the EU

  Citronellol is a fragrance ingredient. Its job is to give the product a scent.

• Citrus Aurantium Bergamia Peel Oil

  Fragrance ingredient (scent)

  An aromatic oil pressed from bergamot peel, used for fragrance and perfuming. Its main job is to give the product its scent.

• Citrus Aurantium Peel Oil

  Fragrance ingredient (scent)

  Citrus Aurantium Peel Oil is a fragrance ingredient. It adds scent to the product.

• Carvone

  Flavoring (adds taste)Fragrance ingredient (scent)

  An ingredient used for flavor and fragrance. It gives the product its scent.

• Benzyl Alcohol

  Fragrance ingredient (scent)Preservative (inhibits microbial growth)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)Restricted in the EU

  Benzyl Alcohol is a multi-tasking ingredient that acts as a preservative to keep the product from spoiling and as a solvent to dissolve other ingredients. It also adds scent and adjusts the thickness of the formula.

• Titanium Dioxide

  UV filter (filters UV rays)Colorant (adds color)Opacifier (makes the formula less see-through)

  Titanium Dioxide is a mineral UV filter that absorbs ultraviolet light. It also works as a white colorant and opacifier, adding whiteness and making the product less see-through. As a color additive it appears on labels as CI 77891.

• Iron Oxides

  Colorant (adds color)

  A colorant that gives the product its shade. On labels it can also appear as CI 77491, CI 77492, or CI 77499.

Source

DailyMed drug label

Source record

https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=3ff286c0-4515-4cab-9b93-a782545b2f36

Retrieved

21 September 2026

Market

United States

Version

v1 of this U.S. formulation

Source tier

Official label document (not independently verified by us)

Entries recorded

54

Record checksum

sha256:4a7324485040999f70348d09da6d5ddf32ead55dde567b65a729b29da3f118a5