Lancôme Lancome Paris Renergie Lift MultiAction Sunscreen Broad Spectrum SPF 15 Firming AntiWrinkle

54 entries · the stored declaration is recorded as complete.

• Avobenzone

  UV filter (filters UV rays)Light stabilizer (protects the formula from light)

  An organic UV filter that absorbs ultraviolet light. It also acts as a light stabilizer, helping the formula hold up under sun exposure. On labels it also appears as Butyl Methoxydibenzoylmethane.

• Octisalate

  UV filter (filters UV rays)Light stabilizer (protects the formula from light)

  An organic UV filter that absorbs ultraviolet light, and doubles as a light stabilizer to keep the formula steady in sun. It also appears on labels as Ethylhexyl Salicylate.

• Octocrylene

  UV filter (filters UV rays)Light stabilizer (protects the formula from light)

  An organic UV filter that absorbs ultraviolet light. It also serves as a light stabilizer, helping keep other filters and the formula intact under sunlight.

• Water

  Antiplaque (CosIng functional class)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  The base liquid that most of the other ingredients dissolve or spread into. It carries the formula and helps condition the skin surface.

• Dimethicone

  Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)

  A silicone that softens and smooths skin feel and forms a protective layer on the surface. It also cuts down foam during production, keeping the formula settled.

• Glycerin

  Denaturant (makes alcohol undrinkable)Fragrance ingredient (scent)Hair conditioning (CosIng functional class)Humectant (holds moisture)Oral care (CosIng functional class)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

  Glycerin draws in and holds moisture while conditioning and protecting skin. It also dissolves other ingredients, adjusts thickness, and can add scent. On labels it may appear as glycerol.

• Hydrogenated Polyisobutene

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Viscosity control (thickens or thins the formula)

  An oily liquid that softens and smooths the skin feel while helping set the product's thickness. In practice it gives the formula a slip and body so it spreads and stays where you put it.

• Cera Alba

  Emollient (softens and smooths skin)Film forming (leaves a thin coating)Fragrance ingredient (scent)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

  Cera Alba is beeswax, used to soften skin, form a film, and help oil and water mix. It smooths skin feel, leaves a thin protective layer, and keeps the water and oil parts blended. It's the Latin label name for beeswax.

  listed as “beeswax”

• Poly C10-30 Alkyl Acrylate

  Emulsion stabilizer (keeps oil and water mixed)Viscosity control (thickens or thins the formula)

  A polymer that stabilizes emulsions and adjusts thickness. In practice, it keeps the oil and water parts from separating and gives the product its body.

• Silica

  Abrasive (physically scrubs)Absorbent (takes up oil or water)Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Opacifier (makes the formula less see-through)Viscosity control (thickens or thins the formula)

  Silica is a fine mineral powder that soaks up excess moisture and oil, and adjusts how thick the product feels. It keeps powders from clumping, adds bulk, and can make a formula look more opaque. Its chemical name is silicon dioxide.

• Acrylates/C10-30 Alkyl Acrylate Crosspolymer

  Emulsion stabilizer (keeps oil and water mixed)Film forming (leaves a thin coating)Viscosity control (thickens or thins the formula)

  A large chain-like molecule that stabilizes emulsions, keeping the oil and water parts mixed. It also forms a thin film on the surface and adjusts the thickness of the product.

• Adenosine

  Skin conditioning (CosIng functional class)

  Adenosine is a skin-conditioning ingredient. It helps keep skin feeling smooth and in good condition.

• Aluminum Starch Octenylsuccinate

  Absorbent (takes up oil or water)Anticaking (keeps powder free-flowing)Viscosity control (thickens or thins the formula)

  A starch-based powder that soaks up excess oil and moisture, keeps the formula from clumping, and adjusts its thickness. In practice it gives the product a smoother, less greasy feel.

• Caprylyl Glycol

  Deodorant (masks or reduces odor)Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)

  A multi-tasker that conditions skin and hair and acts as a deodorant. As an emollient it softens and smooths, leaving skin feeling conditioned.

• Disodium EDTA

  Chelating (binds metal ions in the formula)Viscosity control (thickens or thins the formula)

  An ingredient that binds trace metals that would otherwise spoil the formula, and helps adjust its thickness. This keeps the product stable over time.

• Disodium Stearoyl Glutamate

  Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

  A cleansing agent that helps oil and water mix and lifts away dirt. It also conditions skin and hair, leaving a softer feel.

• Ethylhexylglycerin

  Deodorant (masks or reduces odor)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)

  A multi-tasker that conditions the skin and works as a deodorant agent. It helps improve skin feel while cutting odor.

• Glyceryl Stearate

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

  Glyceryl Stearate is an emollient that softens and smooths skin feel. It also acts as an emulsifier, keeping the oil and water parts blended together.

• Glyceryl Stearate Se

  Surfactant (cleanses or mixes oil and water)

  An emulsifier that helps the oil and water parts of the product stay mixed together. This keeps the formula from separating.

• Guanosine

  Opacifier (makes the formula less see-through)Skin conditioning (CosIng functional class)

  A skin-conditioning ingredient that also works as an opacifier, making the product look less clear or see-through. It helps keep skin feeling conditioned.

• Methyl Glucose Sesquistearate

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

  An ingredient that softens and smooths skin feel while helping oil and water mix. In practice it conditions skin and keeps the watery and oily parts of the formula blended.

• Myristic Acid

  Fragrance ingredient (scent)Opacifier (makes the formula less see-through)Surfactant (cleanses or mixes oil and water)

  This is a fatty acid that works as a cleansing agent, helping lift away oil and dirt. It also makes the product look opaque and adds scent.

• Palmitic Acid

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

  Palmitic Acid softens and smooths the skin feel while also helping oil and water mix. That means it keeps the formula blended and contributes to how it sits on skin.

• PEG-100 Stearate

  Surfactant (cleanses or mixes oil and water)

  A cleansing surfactant, meaning it helps lift away oil and dirt. It's often paired with other emulsifiers in creams.

• Pentylene Glycol

  Humectant (holds moisture)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  A skin-conditioning ingredient that also works as a solvent. It helps dissolve other ingredients and keeps skin feeling conditioned.

• Secale Cereale (Rye) Seed Extract

  Abrasive (physically scrubs)Bulking agent (adds volume)Skin conditioning (CosIng functional class)

  This is an extract from rye seeds. It works as an abrasive to help scrub or polish, adds bulk to the formula, and conditions the skin to keep it soft and smooth.

• Sodium Hydroxide

  Buffering (holds the formula at a set acidity)Denaturant (makes alcohol undrinkable)Restricted in the EU

  Sodium Hydroxide is a strongly alkaline ingredient used in tiny amounts to fine-tune a formula's acidity (buffering). This keeps the product's pH steady. It can also act as a denaturant, altering another substance so it stays fit for use in cosmetics rather than being consumed.

• Sodium Polyacrylate

  Absorbent (takes up oil or water)Binder (holds the formula together)Emollient (softens and smooths skin)Emulsion stabilizer (keeps oil and water mixed)Film forming (leaves a thin coating)Hair fixing (holds hair in place)Skin conditioning (CosIng functional class)Viscosity control (thickens or thins the formula)

  Sodium Polyacrylate is a multi-tasking ingredient that adjusts a product's thickness, helps hold ingredients together, and stabilizes oil-and-water blends. It forms a thin film on the surface, softens and conditions skin, and can absorb liquid. In hair products it also helps hold a style in place.

• Stearic Acid

  Emulsion stabilizer (keeps oil and water mixed)Fragrance ingredient (scent)Refatting (CosIng functional class)Surfactant (cleanses or mixes oil and water)

  Stearic Acid helps oil and water mix, keeps that blend from separating, and cleanses. It also softens skin feel and adds scent, so it keeps the product stable and smooth while contributing fragrance.

• Tocopherol

  Antioxidant (slows the formula oxidizing)Fragrance ingredient (scent)Occlusive (CosIng functional class)Skin conditioning (CosIng functional class)

  Tocopherol is a form of vitamin E used as an antioxidant, which helps keep the formula from going off. It also conditions skin and forms a thin surface layer that slows moisture loss. You may see it listed simply as vitamin E.

• Yeast Extract

  Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)

  An extract of yeast used to condition and protect skin. In practice it helps skin feel soft and forms a light protective layer on the surface.

• Dimethicone/Vinyl Dimethicone Crosspolymer

  Skin conditioning (CosIng functional class)Viscosity control (thickens or thins the formula)

  A silicone elastomer that softens and smooths skin feel and adjusts the thickness of the product. In practice it gives a silky, cushioned texture.

• Dimethiconol

  Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Moisturizing (CosIng functional class)Skin conditioning (CosIng functional class)

  A silicone fluid that softens and smooths skin feel while adding moisture. It also keeps foaming down during production. On skin this leaves a smooth, conditioned surface.

• Acetyl Cedrene

  Fragrance ingredient (scent)

  A fragrance ingredient. Its job is to give the product a scent.

• Benzaldehyde

  Denaturant (makes alcohol undrinkable)Flavoring (adds taste)Fragrance ingredient (scent)

  Benzaldehyde is mainly a fragrance and flavoring ingredient, giving the product its scent. It also acts as a denaturant, which makes any alcohol in the formula unpalatable.

• Benzyl Alcohol

  Fragrance ingredient (scent)Preservative (inhibits microbial growth)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)Restricted in the EU

  Benzyl Alcohol is a multi-tasking ingredient that acts as a preservative to keep the product from spoiling and as a solvent to dissolve other ingredients. It also adds scent and adjusts the thickness of the formula.

• Beta-Caryophyllene

  Fragrance ingredient (scent)Skin conditioning (CosIng functional class)Restricted in the EU

  This adds scent to the product and helps condition the skin. So it works as both a fragrance and a skin-softening touch.

• Carvone

  Flavoring (adds taste)Fragrance ingredient (scent)

  An ingredient used for flavor and fragrance. It gives the product its scent.

• Citronellol

  Fragrance ingredient (scent)Restricted in the EU

  Citronellol is a fragrance ingredient. Its job is to give the product a scent.

• Citrus Aurantium Peel Oil

  Fragrance ingredient (scent)

  Citrus Aurantium Peel Oil is a fragrance ingredient. It adds scent to the product.

• Coumarin

  Fragrance ingredient (scent)Restricted in the EU

  A fragrance ingredient, used to give the product its scent.

• Eugenia Caryophyllus Oil

  Fragrance ingredient (scent)

  A clove oil used to give the product its scent. Its main job here is fragrance.

• Eugenol

  Denaturant (makes alcohol undrinkable)Fragrance ingredient (scent)Tonic (CosIng functional class)Restricted in the EU

  A fragrance ingredient that scents the product. It also acts as a denaturant and a toning agent within the formula.

• Limonene

  Deodorant (masks or reduces odor)Fragrance ingredient (scent)Solvent (dissolves other ingredients)Restricted in the EU

  Limonene works as a scent ingredient and a solvent that helps dissolve other ingredients. It also acts as a deodorant, masking or adjusting odor in the formula.

• Linalool

  Deodorant (masks or reduces odor)Fragrance ingredient (scent)Restricted in the EU

  Linalool is used mainly for fragrance and as a deodorant that adjusts the product's smell. Its job is to shape how the product scents.

• Linalyl Acetate

  Fragrance ingredient (scent)Restricted in the EU

  Linalyl Acetate is a fragrance ingredient. Its role is simply to contribute to the product's scent.

• Pinene

  Antifoaming (stops the formula foaming)Fragrance ingredient (scent)Restricted in the EU

  This works as a fragrance, adding scent to the product. It can also act as an antifoaming agent, keeping unwanted foam down during use or making.

• Tetramethyl Acetyloctahydronaphthalenes

  Fragrance ingredient (scent)Skin conditioning (CosIng functional class)Restricted in the EU

  This is a fragrance ingredient that also conditions skin. It scents the product and helps it feel smooth on skin.

• Vanillin

  Fragrance ingredient (scent)Restricted in the EU

  Vanillin is a fragrance ingredient. Its job is simply to give the product its scent.

• Ci 14700

  Colorant (adds color)Restricted in the EU

  CI 14700 is a colorant, a red dye. It gives the product its color.

  listed as “red 4”

• CI 19140

  Colorant (adds color)Hair dyeing (colors hair)Restricted in the EU

  CI 19140 is a yellow color used to shade the product. It's a colorant and can also be used to dye hair. You may see it listed as Tartrazine.

  listed as “yellow 5”

• Chlorphenesin

  Preservative (inhibits microbial growth)

  This is a preservative that fights microbes. It helps keep the product from spoiling as bacteria and other organisms try to grow in it.

• Phenoxyethanol

  Preservative (inhibits microbial growth)

  This is a preservative that fights microbes. It helps keep the product from spoiling over time.

• Parfum

  Fragrance ingredient (scent)

  This is the fragrance, a blend of scent ingredients added to give the product an odor or mask other smells. It's also listed as "aroma" on some labels.

  listed as “fragrance”

Source

DailyMed drug label

Source record

https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=2b634b3f-0d2b-4ae4-b302-9befb14a90df

Retrieved

21 September 2026

Market

United States

Version

v1 of this U.S. formulation

Source tier

Official label document (not independently verified by us)

Entries recorded

54

Record checksum

sha256:aa86b7de564e785519c932f8c4db758b26a6a7e93229b5480e7190bbff4c7a03