ERKUL KOZMETIK SANAYI VE TICARET ANONIM SIRKETI GR CC Broad Spectrum SPF 30

54 entries · the stored declaration is recorded as incomplete. An incomplete list is treated as unknown, never as a pass.

• Octinoxate

  UV filter (filters UV rays)Light stabilizer (protects the formula from light)

  An organic UV filter that absorbs ultraviolet light. It also acts as a light stabilizer, helping the formula hold up when exposed to sunlight. You'll often see it listed as Ethylhexyl Methoxycinnamate.

• Oxybenzone

  UV filter (filters UV rays)Light stabilizer (protects the formula from light)Restricted in the EU

  Oxybenzone is an organic UV filter that absorbs ultraviolet light. It also works as a light stabilizer, helping the formula hold up under sun exposure. On labels it often appears as Benzophenone-3.

• Water

  Antiplaque (CosIng functional class)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  The base liquid that most of the other ingredients dissolve or spread into. It carries the formula and helps condition the skin surface.

• Dimethicone

  Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)

  A silicone that softens and smooths skin feel and forms a protective layer on the surface. It also cuts down foam during production, keeping the formula settled.

  listed as “Dimethicone, Unspecified”

• Polymethylsilsesquioxane

  Opacifier (makes the formula less see-through)

  This is an opacifier, meaning it makes the product look less see-through. It gives the formula a more solid, opaque appearance.

  listed as “Polymethylsilsesquioxane (4.5 Microns)”

• Butylene Glycol

  Fragrance ingredient (scent)Humectant (holds moisture)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

  A multitasking liquid that acts as a humectant, solvent, and thickness adjuster, and carries a scent role. It draws in and holds moisture, dissolves other ingredients, and helps set the product's texture.

• Squalane

  Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Refatting (CosIng functional class)Skin conditioning (CosIng functional class)

  An emollient that softens and smooths the skin, and also conditions hair. It leaves a smooth feel and helps replace oils on the surface.

• Peg-40 Monostearate

  No general role is recorded for this ingredient in the inventory we hold. That is a gap in our record, not a statement about the ingredient.

• Behenyl Alcohol

  Binder (holds the formula together)Emollient (softens and smooths skin)Emulsion stabilizer (keeps oil and water mixed)Skin conditioning (CosIng functional class)Viscosity control (thickens or thins the formula)

  A multitasker that softens and smooths skin while adjusting the product's thickness. It also helps hold the mix together and keeps the oil and water parts from separating.

  listed as “Docosanol”

• Glyceryl Stearate

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

  Glyceryl Stearate is an emollient that softens and smooths skin feel. It also acts as an emulsifier, keeping the oil and water parts blended together.

  listed as “Glyceryl Monostearate”

• Talc

  Abrasive (physically scrubs)Absorbent (takes up oil or water)Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Opacifier (makes the formula less see-through)Skin protecting (CosIng functional class)Slip modifier (changes how the formula spreads)Restricted in the EU

  Talc is a soft mineral powder that absorbs moisture and adds bulk and slip. In practice it helps the product spread, keeps powders from clumping, and can add opacity.

• Phenyl Trimethicone

  Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Occlusive (CosIng functional class)Skin conditioning (CosIng functional class)

  This is a silicone that conditions skin and hair and cuts down on foaming. As an occlusive it forms a layer that helps hold in moisture, and it gives a smooth feel.

• Polyglyceryl-10 Pentastearate

  Skin conditioning (CosIng functional class)

  Polyglyceryl-10 Pentastearate is a skin-conditioning ingredient. It helps soften and smooth the feel of the skin.

• Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

  Emulsion stabilizer (keeps oil and water mixed)Viscosity control (thickens or thins the formula)

  This is a copolymer used to thicken the formula and keep it stable. It adjusts thickness and helps stop the oil and water parts from separating, giving the product a consistent texture.

  listed as “Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer (100000 Mpa.S At 1.5%)”

• Phenoxyethanol

  Preservative (inhibits microbial growth)

  This is a preservative that fights microbes. It helps keep the product from spoiling over time.

• Tocopheryl Acetate

  Antioxidant (slows the formula oxidizing)Skin conditioning (CosIng functional class)

  Tocopheryl Acetate is a form of vitamin E that acts as an antioxidant, helping keep the formula from going off. It also conditions the skin, softening its feel.

  listed as “.Alpha.-Tocopherol Acetate”

• Titanium Dioxide

  UV filter (filters UV rays)Colorant (adds color)Opacifier (makes the formula less see-through)

  Titanium Dioxide is a mineral UV filter that absorbs ultraviolet light. It also works as a white colorant and opacifier, adding whiteness and making the product less see-through. As a color additive it appears on labels as CI 77891.

• Sodium Stearoyl Lactylate

  Surfactant (cleanses or mixes oil and water)

  An emulsifier that helps the oil and water parts stay mixed together. This keeps the product from separating into layers. It also appears on labels as sodium 2-stearoyllactate.

• Glycerin

  Denaturant (makes alcohol undrinkable)Fragrance ingredient (scent)Hair conditioning (CosIng functional class)Humectant (holds moisture)Oral care (CosIng functional class)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

  Glycerin draws in and holds moisture while conditioning and protecting skin. It also dissolves other ingredients, adjusts thickness, and can add scent. On labels it may appear as glycerol.

• Pentylene Glycol

  Humectant (holds moisture)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  A skin-conditioning ingredient that also works as a solvent. It helps dissolve other ingredients and keeps skin feeling conditioned.

• Strelitzia Nicolai Whole

  No general role is recorded for this ingredient in the inventory we hold. That is a gap in our record, not a statement about the ingredient.

• Sodium Dehydroacetate

  Preservative (inhibits microbial growth)

  A preservative that helps keep the product from spoiling over time. That means it protects the formula against microbes.

• Luviset 360

  No reviewed note yet.

• Polysorbate 60

  Surfactant (cleanses or mixes oil and water)

  Polysorbate 60 helps oil and water mix into a stable, even product. It doubles as a cleansing agent that helps lift away oil and dirt.

• Isopropyl Titanium Triisostearate

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

  An emollient that softens and smooths skin feel while also helping oil and water mix. This keeps the water and oil parts blended into a stable product.

• Citric Acid

  Buffering (holds the formula at a set acidity)Chelating (binds metal ions in the formula)Fragrance ingredient (scent)

  Citric Acid is a mild acid used to fine-tune a formula's pH. It keeps the acidity steady (buffering), binds trace metals that would spoil the formula (chelating), and can add a scent note.

  listed as “Citric Acid Monohydrate”

• Fructose

  Humectant (holds moisture)

  A sugar used as a humectant. It draws in and holds moisture to keep the product and skin from drying out.

• Sodium Hydroxide

  Buffering (holds the formula at a set acidity)Denaturant (makes alcohol undrinkable)Restricted in the EU

  Sodium Hydroxide is a strongly alkaline ingredient used in tiny amounts to fine-tune a formula's acidity (buffering). This keeps the product's pH steady. It can also act as a denaturant, altering another substance so it stays fit for use in cosmetics rather than being consumed.

• Urea

  Antistatic (reduces static)Buffering (holds the formula at a set acidity)Humectant (holds moisture)Skin conditioning (CosIng functional class)

  Urea is a multitasker that draws in and holds moisture in the product and on skin. It also conditions the skin, helps keep static down, and steadies the formula's acidity. In short, it keeps things hydrated and balanced.

• Ethylhexylglycerin

  Deodorant (masks or reduces odor)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)

  A multi-tasker that conditions the skin and works as a deodorant agent. It helps improve skin feel while cutting odor.

• Tromethamine

  Buffering (holds the formula at a set acidity)Fragrance ingredient (scent)Restricted in the EU

  Tromethamine is a buffering agent that helps hold the product's acidity steady. It also adds fragrance.

• Magnesium Stearate

  Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Colorant (adds color)Moisturizing (CosIng functional class)

  Magnesium Stearate keeps powders from clumping and adds bulk to the formula. It also adds color and helps hold in moisture.

• Sorbitan Isostearate

  Surfactant (cleanses or mixes oil and water)

  An emulsifier that helps oil and water mix and stay together. This keeps the product from separating so it stays smooth and even.

• Allantoin

  Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)Soothing (CosIng functional class)

  Allantoin is a skin-conditioning and skin-protecting ingredient with a soothing role. It helps keep skin feeling smooth and comfortable and forms a protective feel on the surface.

• Maltose

  Fragrance ingredient (scent)Moisturizing (CosIng functional class)Skin conditioning (CosIng functional class)

  A sugar that adds fragrance and helps hold in moisture. It also conditions the skin, keeping it feeling soft and smooth.

  listed as “Maltose, Unspecified Form”

• Sodium Chloride

  Bulking agent (adds volume)Fragrance ingredient (scent)Oral care (CosIng functional class)Viscosity control (thickens or thins the formula)

  Common table salt, used here mainly to adjust the thickness of the formula. It can also act as a bulking agent to add body, and shows up in oral care products. On labels it's simply salt.

• Sodium Lactate

  Buffering (holds the formula at a set acidity)Humectant (holds moisture)Keratolytic (CosIng functional class)

  Sodium Lactate is a salt that helps balance the product's acidity (buffering) and acts as a humectant, drawing in and holding moisture. It also has a keratolytic action, meaning it helps loosen and shed surface skin cells. On labels it's the sodium salt of lactic acid.

• Sodium PCA

  Antistatic (reduces static)Hair conditioning (CosIng functional class)Humectant (holds moisture)Skin conditioning (CosIng functional class)

  Sodium PCA is a humectant that draws in and holds moisture, and it conditions both skin and hair to keep them feeling soft. It also has an antistatic action, helping reduce static flyaways in hair.

  listed as “Sodium Pyrrolidone Carboxylate”

• Trehalose

  Humectant (holds moisture)Moisturizing (CosIng functional class)

  Trehalose is a sugar used as a humectant, meaning it draws in and holds moisture. That keeps skin and the formula from drying out.

• Aluminum Hydroxide

  Emollient (softens and smooths skin)Humectant (holds moisture)Opacifier (makes the formula less see-through)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)Viscosity control (thickens or thins the formula)

  A mineral ingredient that draws in and holds moisture, softens skin feel, and adjusts the product's thickness. It also adds opacity and forms a protective layer on the skin's surface.

• Sodium Laureth-12 Sulfate

  Foaming (produces foam)Surfactant (cleanses or mixes oil and water)

  A cleansing agent that washes away oil and grime while building foam. It works up a lather so the product spreads and rinses easily.

• Caprylyl Glycol

  Deodorant (masks or reduces odor)Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)

  A multi-tasker that conditions skin and hair and acts as a deodorant. As an emollient it softens and smooths, leaving skin feeling conditioned.

• Glucose

  Humectant (holds moisture)

  Glucose draws in and holds moisture. That helps keep the product and skin from drying out.

  listed as “Anhydrous Dextrose”

• Sodium Hyaluronate

  Humectant (holds moisture)Skin conditioning (CosIng functional class)

  A moisture-grabbing ingredient that draws in and holds water. That keeps skin conditioned and helps it feel supple. It's the salt form of hyaluronic acid.

  listed as “Hyaluronate Sodium”

• C11-15 Pareth-7

  Surfactant (cleanses or mixes oil and water)

  This is a surfactant that helps oil and water mix and also lifts away dirt and oil. In practice it keeps the formula blended and does cleansing work.

• Potassium Sorbate

  Fragrance ingredient (scent)Preservative (inhibits microbial growth)

  A salt used mainly as a preservative to keep the product from spoiling. It also contributes to fragrance. In practice, it helps the formula stay stable over time.

• Mica

  Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Colorant (adds color)Opacifier (makes the formula less see-through)

  Mica is a mineral used to add color and to make the product look opaque rather than see-through. It also keeps powders from clumping and adds bulk to the formula.

• Iron Oxides

  Colorant (adds color)

  A colorant that gives the product its shade. On labels it can also appear as CI 77491, CI 77492, or CI 77499.

  listed as “Ferric Oxide Red”

• Iron Oxides

  Colorant (adds color)

  A colorant that gives the product its shade. On labels it can also appear as CI 77491, CI 77492, or CI 77499.

  listed as “Ferric Oxide Yellow”

• Ferrosoferric Oxide

  Colorant (adds color)

  This is a mineral colorant used to tint the product. On labels it's often grouped under Iron Oxides and appears as CI 77499.

• CI 19140

  Colorant (adds color)Hair dyeing (colors hair)Restricted in the EU

  CI 19140 is a yellow color used to shade the product. It's a colorant and can also be used to dye hair. You may see it listed as Tartrazine.

  listed as “Fd&C Yellow No. 5”

• Acid Blue 9

  Hair dyeing (colors hair)

  Acid Blue 9 is a colorant, giving the product its blue shade. It can also be used to tint hair.

  listed as “Fd&C Blue No. 1”

• Chromic Oxide

  No reviewed note yet.

• CI 77007

  Colorant (adds color)

  CI 77007 is a colorant, an inorganic pigment. It adds color to the product; it also goes by the name Ultramarines.

  listed as “Ultramarine Blue”

Source

DailyMed drug label

Source record

https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=751d5194-f5ea-401b-9439-7770510a588c

Retrieved

21 September 2026

Market

United States

Version

v1 of this U.S. formulation

Source tier

Official label document (not independently verified by us)

Entries recorded

54

Record checksum

sha256:4ab7a5925a46de12f45c5b042cc438096ede6d089adfbe7b678f2a7d25d19247