Derma Care Research Labs, LLC Dr. Throwers SPF 30 Face and Body Sunscreen

34 entries · the stored declaration is recorded as complete.

• Octisalate

  Light stabiliser (protects the formula from light)UV absorber (protects the formula from light, not a sunscreen filter)UV filter (filters UV rays)

  An organic UV filter that absorbs ultraviolet light, and doubles as a light stabilizer to keep the formula steady in sun. It also appears on labels as Ethylhexyl Salicylate.

• Avobenzone

  Light stabiliser (protects the formula from light)UV absorber (protects the formula from light, not a sunscreen filter)UV filter (filters UV rays)

  An organic UV filter that absorbs ultraviolet light. It also acts as a light stabilizer, helping the formula hold up under sun exposure. On labels it also appears as Butyl Methoxydibenzoylmethane.

• Octocrylene

  Light stabiliser (protects the formula from light)UV absorber (protects the formula from light, not a sunscreen filter)UV filter (filters UV rays)

  An organic UV filter that absorbs ultraviolet light. It also serves as a light stabilizer, helping keep other filters and the formula intact under sunlight.

• Homosalate

  Fragrance ingredient (scent)UV absorber (protects the formula from light, not a sunscreen filter)UV filter (filters UV rays)

  An organic UV filter that absorbs ultraviolet light. It also adds scent to the product.

• Water

  Antiplaque (CosIng functional class)otherSkin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  The base liquid that most of the other ingredients dissolve or spread into. It carries the formula and helps condition the skin surface.

• Cetyl Dimethicone

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)

  A silicone that works as an emollient, softening and smoothing skin feel. It gives the product a silky, slippery glide.

• C12-15 Alkyl Benzoate

  Emollient (softens and smooths skin)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)

  This is a lightweight oily ingredient that softens and smooths the skin. It also helps keep the product fresh by limiting microbe growth.

• Hydrated Silica

  Abrasive (physically scrubs)Absorbent (takes up oil or water)Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Opacifier (makes the formula less see-through)otherViscosity control (thickens or thins the formula)

  Hydrated Silica is a form of silica, a mineral made of silicon and oxygen, that contains bound water. In cosmetics it is used as an abrasive, thickener, or absorbent, and can help control texture or matte appearance. It is the same basic mineral family as sand and quartz in a processed, powdered form.

• Styrene/Acrylates Copolymer

  Film forming (leaves a thin coating)Opacifier (makes the formula less see-through)

  Styrene/Acrylates Copolymer forms a film and makes the product look opaque. In practice it leaves a thin layer on the skin and gives the formula a non-transparent appearance.

• Neopentyl Glycol Diheptanoate

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)

  An emollient that softens and smooths skin feel. In practice, it helps the product spread easily and leaves a smooth finish.

• Polyester-7

  Film forming (leaves a thin coating)Skin conditioning (CosIng functional class)Viscosity control (thickens or thins the formula)

  This is a polymer that forms a film, conditions the skin, and adjusts thickness. It leaves a thin layer on the surface, smooths the skin feel, and gives the product body.

• Capryloyl Glycine

  Anti-seborrheic (CosIng functional class)Anti-sebum (CosIng functional class)Deodorant (masks or reduces odour)Hair conditioning (CosIng functional class)Preservative (inhibits microbial growth)Surfactant (cleanses or mixes oil and water)

  A cleansing ingredient that also works as a deodorant and helps control sebum and microbes. It conditions hair and helps lift away dirt.

• Polyester-8

  Film forming (leaves a thin coating)otherSkin conditioning (CosIng functional class)

  This is a film-forming polymer that also conditions the skin. It lays down a thin layer on the surface and helps the skin feel smooth.

• Cinnamomum Zeylanicum Bark Extract

  Antioxidant (slows the formula oxidising)Astringent (CosIng functional class)Emollient (softens and smooths skin)Fragrance ingredient (scent)Humectant (holds moisture)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)

  This is an extract from cinnamon bark that plays several roles: it conditions and softens skin, draws in and holds moisture, and helps protect skin. It also acts as an antioxidant, an astringent that tightens skin feel, keeps microbes in check, and adds scent.

• Portulaca Oleracea Extract

  Skin conditioning (CosIng functional class)

  An extract of the purslane plant, used as a skin conditioner. It helps keep skin feeling soft and smooth.

• Propylene Glycol

  Fragrance ingredient (scent)Humectant (holds moisture)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

  A multi-tasker that draws in and holds moisture, dissolves other ingredients as a solvent, and adjusts thickness. It also plays a role in fragrance and general skin conditioning. In practice it helps keep the product from drying out and keeps the texture consistent.

• Acrylates/Dimethicone Copolymer

  Anticaking (keeps powder free-flowing)Binder (holds the formula together)Film forming (leaves a thin coating)Skin conditioning (CosIng functional class)

  A silicone-acrylic blend that forms a thin film and conditions skin. It helps the product spread into an even layer, keeps powdery ingredients from clumping, holds the mix together, and softens skin feel.

• Butylated Hydroxytoluene

  Antioxidant (slows the formula oxidising)Fragrance ingredient (scent)

  An antioxidant that also adds a scent note. It helps keep the oils in the formula from going off, so the product stays stable longer. Often shortened to BHT on labels.

  listed as “BHT”

• Bisabolol

  Fragrance ingredient (scent)otherSkin conditioning (CosIng functional class)Soothing (CosIng functional class)

  A conditioning and soothing ingredient that also adds a light fragrance. It softens the skin's feel and contributes scent to the product. On labels it may also appear as Levomenol.

• Caprylyl Glycol

  Deodorant (masks or reduces odour)Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)

  A multi-tasker that conditions skin and hair and acts as a deodorant. As an emollient it softens and smooths, leaving skin feeling conditioned.

• Cedrus Atlantica Bark Extract

  Fragrance ingredient (scent)Skin conditioning (CosIng functional class)

  An extract from Atlas cedar bark used to add scent and condition the skin. It helps give the product a fragrance and leaves skin feeling conditioned.

• Chlorphenesin

  Preservative (inhibits microbial growth)

  This is a preservative that fights microbes. It helps keep the product from spoiling as bacteria and other organisms try to grow in it.

• Cyclopentasiloxane

  Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

  This is a lightweight silicone used to condition skin and hair and to soften and smooth skin feel. It also acts as a solvent, helping the product spread and dissolve other ingredients.

• Disodium EDTA

  Chelating (binds metal ions in the formula)otherViscosity control (thickens or thins the formula)

  An ingredient that binds trace metals that would otherwise spoil the formula, and helps adjust its thickness. This keeps the product stable over time.

• Ethylhexyl Stearate

  Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)

  An oil-like ingredient that softens and smooths the skin feel. It leaves a light, spreadable finish on the skin.

• Ethylhexylglycerin

  Deodorant (masks or reduces odour)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)

  A multi-tasker that conditions the skin and works as a deodorant agent. It helps improve skin feel while cutting odor.

• Mannan

  Film forming (leaves a thin coating)

  Mannan is a film former. It leaves a thin layer on the surface as the product dries.

• Sarcosine

  Skin conditioning (CosIng functional class)

  Sarcosine is a skin-conditioning ingredient. It helps keep skin feeling soft and smooth.

• Sodium Polyacrylate

  Absorbent (takes up oil or water)Binder (holds the formula together)Emollient (softens and smooths skin)Emulsion stabiliser (keeps oil and water mixed)Film forming (leaves a thin coating)Hair fixing (holds hair in place)Skin conditioning (CosIng functional class)Viscosity control (thickens or thins the formula)

  Sodium Polyacrylate is a multi-tasking ingredient that adjusts a product's thickness, helps hold ingredients together, and stabilises oil-and-water blends. It forms a thin film on the surface, softens and conditions skin, and can absorb liquid. In hair products it also helps hold a style in place.

• Steareth-2

  Surfactant (cleanses or mixes oil and water)

  A surfactant that helps oil and water mix and also lifts away dirt and oil. It keeps the formula blended and contributes to cleansing.

• Steareth-100

  Gel forming (sets the formula into a gel)Surfactant (cleanses or mixes oil and water)

  An ingredient that helps oil and water mix and can also help form a gel. In practice it keeps the different parts of the product blended and adds structure. It can also act as a cleansing agent that lifts away dirt and oil.

• Trideceth-6

  Surfactant (cleanses or mixes oil and water)

  A surfactant that works as both a cleanser and an emulsifier. It helps oil and water mix and lifts away dirt and oil, keeping the formula blended.

• Xanthan Gum

  Binder (holds the formula together)Emulsion stabiliser (keeps oil and water mixed)Gel forming (sets the formula into a gel)otherSkin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)Viscosity control (thickens or thins the formula)

  A thickener that adjusts how thick the product is and forms a gel-like texture. It keeps oil and water mixed and stops the blend from separating, giving a stable, even feel.

• Phenoxyethanol

  Preservative (inhibits microbial growth)

  This is a preservative that fights microbes. It helps keep the product from spoiling over time.

Source

DailyMed drug label

Source record

https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=d680b6f6-e1a9-47a4-e053-2a95a90ae3b0

Retrieved

22 September 2026

Market

United States

Version

v1 of this U.S. formulation

Source tier

Official label document (not independently verified by us)

Entries recorded

34

Record checksum

sha256:a49980d4be3e6eba0e8866d1c8e9ea712801f9b90b7b426550fdcaf30ca86a16