SPF Scout · Product record

UV Clear Deep Tint

Labeler: CP Skin Health Group

SPF 46 as labeled

U.S. formulation · record last retrieved 23 September 2026

Quick facts

Does UV Clear Deep Tint list fragrance?

We cannot say whether fragrance is listed. The ingredient list stored for this record is not recorded as complete.

What are the active ingredients in UV Clear Deep Tint?

The Active ingredients block printed on the label reads: Octinoxate 7.5% Zinc Oxide 9.0%

Is UV Clear Deep Tint mineral-only?

No. The ingredient list currently stored for this U.S. formulation names Octinoxate.

Does UV Clear Deep Tint contain oxybenzone?

We cannot say whether oxybenzone is listed. The ingredient list stored for this record is not recorded as complete.

Each answer restates the ingredient list stored for this record. It does not predict whether your skin will react.

What is listed

The ingredient declaration stored for this formulation, reproduced exactly as it was recorded from the source below.

Octinoxate | Zinc Oxide | Water | Butylene Glycol | Phenoxyethanol | Iodopropynyl Butylcarbamate | Lactic Acid | Hyaluronic Acid | Niacinamide | Isopropyl Palmitate | Ethylhexyl Stearate | Octyldodecyl Neopentanoate | Oleth-3 Phosphate | Phosphoric Acid | Ferric Oxide Yellow | Ferric Oxide Red | Ferrosoferric Oxide | Cyclomethicone 5 | Butylated Hydroxytoluene | .Alpha.-Tocopherol Acetate | Triethoxycaprylylsilane | Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer (45000 Mpa.S At 1%) | Polyisobutylene (1000 Mw) | Peg-7 Trimethylolpropane Coconut Ether

24 entries · the stored declaration is recorded as incomplete. An incomplete list is treated as unknown, never as a pass.

What each ingredient generally does

Each entry that matched a canonical ingredient, with the function recorded for it. These notes describe the role an ingredient plays in a formulation. They do not assess an ingredient.

  • Octinoxate

    UV filter (filters UV rays)Light stabilizer (protects the formula from light)

    An organic UV filter that absorbs ultraviolet light. It also acts as a light stabilizer, helping the formula hold up when exposed to sunlight. You'll often see it listed as Ethylhexyl Methoxycinnamate.

  • Zinc Oxide

    UV filter (filters UV rays)Bulking agent (adds volume)Colorant (adds color)Light stabilizer (protects the formula from light)Oral care (CosIng functional class)Preservative (inhibits microbial growth)Skin protecting (CosIng functional class)

    A mineral UV filter that absorbs ultraviolet light, the core sun-protection job in this product. It also helps protect the skin surface and can add whiteness or opacity. On some labels it appears as CI 77947 when used for color.

  • Water

    Antiplaque (CosIng functional class)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

    The base liquid that most of the other ingredients dissolve or spread into. It carries the formula and helps condition the skin surface.

  • Butylene Glycol

    Fragrance ingredient (scent)Humectant (holds moisture)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

    A multitasking liquid that acts as a humectant, solvent, and thickness adjuster, and carries a scent role. It draws in and holds moisture, dissolves other ingredients, and helps set the product's texture.

  • Phenoxyethanol

    Preservative (inhibits microbial growth)

    This is a preservative that fights microbes. It helps keep the product from spoiling over time.

  • Iodopropynyl Butylcarbamate

    Preservative (inhibits microbial growth)

    A preservative that keeps the product from spoiling. It holds off the growth of microbes so the formula stays stable over time.

  • Lactic Acid

    Buffering (holds the formula at a set acidity)Humectant (holds moisture)Skin conditioning (CosIng functional class)

    Lactic Acid is a multi-tasker that helps set and steady the product's acidity level. It also draws in and holds moisture and conditions the skin, so it can soften and smooth as it works.

  • Sodium Hyaluronate

    Humectant (holds moisture)Skin conditioning (CosIng functional class)

    A moisture-grabbing ingredient that draws in and holds water. That keeps skin conditioned and helps it feel supple. It's the salt form of hyaluronic acid.

    listed as “Hyaluronic Acid”

  • Niacinamide

    Smoothing (CosIng functional class)

    An ingredient that smooths the skin's surface. In practice, it helps the product leave skin feeling even.

  • Isopropyl Palmitate

    Binder (holds the formula together)Emollient (softens and smooths skin)Fragrance ingredient (scent)Skin conditioning (CosIng functional class)

    An emollient that softens and smooths skin feel while helping hold the formula together. It also can carry fragrance and lends a smooth, spreadable texture.

  • Ethylhexyl Stearate

    Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)

    An oil-like ingredient that softens and smooths the skin feel. It leaves a light, spreadable finish on the skin.

  • Octyldodecyl Neopentanoate

    Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)

    An emollient that softens and smooths skin feel. In practice it gives the product a lighter, easier-to-spread texture.

  • Oleth-3 Phosphate

    Surfactant (cleanses or mixes oil and water)

    Oleth-3 Phosphate is a cleansing agent that helps lift away oil and dirt. In practice it lets the product rinse or wipe residue off the skin.

  • Phosphoric Acid

    Buffering (holds the formula at a set acidity)

    This is a buffering agent, meaning it adjusts and steadies the product's acidity level. In practice it helps keep the formula's pH consistent.

  • Iron Oxides

    Colorant (adds color)

    A colorant that gives the product its shade. On labels it can also appear as CI 77491, CI 77492, or CI 77499.

    listed as “Ferric Oxide Yellow”

  • Iron Oxides

    Colorant (adds color)

    A colorant that gives the product its shade. On labels it can also appear as CI 77491, CI 77492, or CI 77499.

    listed as “Ferric Oxide Red”

  • Ferrosoferric Oxide

    Colorant (adds color)

    This is a mineral colorant used to tint the product. On labels it's often grouped under Iron Oxides and appears as CI 77499.

  • Cyclopentasiloxane

    Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)Restricted in the EU

    This is a lightweight silicone used to condition skin and hair and to soften and smooth skin feel. It also acts as a solvent, helping the product spread and dissolve other ingredients.

    listed as “Cyclomethicone 5”

  • Butylated Hydroxytoluene

    Antioxidant (slows the formula oxidizing)Fragrance ingredient (scent)Restricted in the EU

    An antioxidant that also adds a scent note. It helps keep the oils in the formula from going off, so the product stays stable longer. Often shortened to BHT on labels.

  • Tocopheryl Acetate

    Antioxidant (slows the formula oxidizing)Skin conditioning (CosIng functional class)

    Tocopheryl Acetate is a form of vitamin E that acts as an antioxidant, helping keep the formula from going off. It also conditions the skin, softening its feel.

    listed as “.Alpha.-Tocopherol Acetate”

  • Triethoxycaprylylsilane

    Binder (holds the formula together)

    A binding ingredient that helps hold the parts of the formula together. It is often used to coat and bind powders in a mix.

  • Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

    Emulsion stabilizer (keeps oil and water mixed)Viscosity control (thickens or thins the formula)

    This is a copolymer used to thicken the formula and keep it stable. It adjusts thickness and helps stop the oil and water parts from separating, giving the product a consistent texture.

    listed as “Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer (45000 Mpa.S At 1%)”

  • Polyisobutene

    Binder (holds the formula together)Film forming (leaves a thin coating)Viscosity control (thickens or thins the formula)

    A thickening and binding agent that also forms a film. It adjusts how thick the product is, holds the mix together, and leaves a thin coating on the skin as it dries.

    listed as “Polyisobutylene (1000 Mw)”

  • Peg-7 Trimethylolpropane Coconut Ether

    Surfactant (cleanses or mixes oil and water)

    This ingredient helps oil and water mix and can act as a cleansing agent. It keeps the oily and watery parts blended together and helps rinse away oils.

Checking this against your own list

SPF Scout's Personal Ingredient Check runs in the app, on your device. This page cannot see a personal avoidance list. Your selections are stored on your phone and are never sent to this website. There is nowhere on our side for them to go.

In the app you choose the ingredients you already avoid, and every entry in this declaration that matches one of them is shown to you with the alias path that produced the match.

This comparison does not predict whether your skin will react.

Source quality

Source
DailyMed drug label
Source record
https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=ead07d51-9400-4f0a-8966-7052dfae67bc
Retrieved
23 September 2026
Market
United States
Version
v1 of this U.S. formulation
Source tier
Official label document (not independently verified by us)
Entries recorded
24
Record checksum
sha256:3cec185422e7bd9015f3a25ad8dd946d257d0a67cdbeac3b2a7669f802370a35

Always compare this record with your current package.

Report an incorrect formulation