SPF Scout · Product record

Clinique Even Better Clinical Serum Foundation Broad Spectrum SPF 25

Labeler: CLINIQUE LABORATORIES

SPF 25 as labeled

U.S. formulation · record last retrieved 22 September 2026

Quick facts

Does Clinique Even Better Clinical Serum Foundation Broad Spectrum SPF 25 list fragrance?

We cannot say whether fragrance is listed. The ingredient list stored for this record is not recorded as complete.

What are the active ingredients in Clinique Even Better Clinical Serum Foundation Broad Spectrum SPF 25?

The Active ingredients block printed on the label reads: Titanium Dioxide 2.4% Zinc Oxide 5.9%

Is Clinique Even Better Clinical Serum Foundation Broad Spectrum SPF 25 mineral-only?

Yes. The actives named in the ingredient list currently stored for this U.S. formulation are only Titanium Dioxide and Zinc Oxide, and none of the FDA's other sunscreen actives is listed.

Does Clinique Even Better Clinical Serum Foundation Broad Spectrum SPF 25 contain oxybenzone?

We cannot say whether oxybenzone is listed. The ingredient list stored for this record is not recorded as complete.

Each answer restates the ingredient list stored for this record. It does not predict whether your skin will react.

What is listed

The ingredient declaration stored for this formulation, reproduced exactly as it was recorded from the source below.

Titanium Dioxide | Zinc Oxide | Nymphaea Alba Root | Green Tea Leaf | Chia Seed | Molasses | Dimethoxytolyl Propylresorcinol | Caffeine | Niacinamide | Salicylic Acid | Linoleic Acid | Tocopherol | Myeloperoxidase | Glucose Oxidase | Limosilactobacillus Reuteri | Enoxolone | Cholesterol | Hydrogenated Jojoba Oil, Randomized | Anhydrous Dextrose | Dimethicone/Vinyl Dimethicone Crosspolymer (Soft Particle) | Laureth-7 | Trimethylsiloxysilicate (M/Q 0.6-0.8) | Sorbitan Sesquioleate | Egg Phospholipids | Xanthan Gum | Silicon Dioxide | Caprylyl Glycol | Dimethicone Peg-15 Acetate | Disteardimonium Hectorite | Triethoxycaprylylsilane | Aluminum Oxide | Propylene Carbonate | Dipropylene Glycol | Sodium Chloride | Sodium Hydroxide | Citric Acid Monohydrate | Potassium Phosphate, Unspecified Form | Edetate Sodium | Sodium Citrate, Unspecified Form | Potassium Sorbate | Phenoxyethanol | Mica | Ferric Oxide Red | Water | Dimethicone | Dimethicone Peg-10 Phosphate | Butylene Glycol | Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer | Phenyl Trimethicone | Isododecane | Butyloctyl Salicylate | Isodecyl Isononanoate | Lauryl Peg-9 Polydimethylsiloxyethyl Dimethicone | Alcohol | Dimethicone/Vinyl Dimethicone Crosspolymer (Hard Particle) | Hydrated Silica | Ascorbyl Glucoside | Tetrahexyldecyl Ascorbate | Magnesium Ascorbyl Phosphate | Hyaluronate Sodium | .Alpha.-Tocopherol Acetate | Saccharina Latissima | Polygala Senega Root | Berberis Vulgaris Root Bark

64 entries · the stored declaration is recorded as incomplete. An incomplete list is treated as unknown, never as a pass.

What each ingredient generally does

Each entry that matched a canonical ingredient, with the function recorded for it. These notes describe the role an ingredient plays in a formulation. They do not assess an ingredient.

  • Titanium Dioxide

    UV filter (filters UV rays)Colorant (adds color)Opacifier (makes the formula less see-through)

    Titanium Dioxide is a mineral UV filter that absorbs ultraviolet light. It also works as a white colorant and opacifier, adding whiteness and making the product less see-through. As a color additive it appears on labels as CI 77891.

  • Zinc Oxide

    UV filter (filters UV rays)Bulking agent (adds volume)Colorant (adds color)Light stabilizer (protects the formula from light)Oral care (CosIng functional class)Preservative (inhibits microbial growth)Skin protecting (CosIng functional class)

    A mineral UV filter that absorbs ultraviolet light, the core sun-protection job in this product. It also helps protect the skin surface and can add whiteness or opacity. On some labels it appears as CI 77947 when used for color.

  • Nymphaea Alba Root Extract

    Skin conditioning (CosIng functional class)

    A water lily root extract that works as a skin conditioner. It helps skin feel soft and smooth.

    listed as “Nymphaea Alba Root”

  • Camellia Sinensis Leaf Extract

    Antioxidant (slows the formula oxidizing)Astringent (CosIng functional class)Emollient (softens and smooths skin)Fragrance ingredient (scent)Humectant (holds moisture)Oral care (CosIng functional class)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)Tonic (CosIng functional class)UV absorber (protects the formula from light, not a sunscreen filter)

    An extract from tea leaves that does several jobs: it draws in and holds moisture, softens the skin, and works as an antioxidant. It also acts as an astringent and adds a mild scent. On labels this is the tea leaf extract.

    listed as “Green Tea Leaf”

  • Salvia Hispanica Seed

    Abrasive (physically scrubs)

    This is the whole chia seed used as an abrasive in the product. That means it provides small particles that scrub and buff the skin's surface.

    listed as “Chia Seed”

  • Molasses

    Skin conditioning (CosIng functional class)

    A syrup left over from processing sugarcane, used to condition skin. It helps keep skin feeling soft and smooth.

  • Dimethoxytolyl Propylresorcinol

    Antioxidant (slows the formula oxidizing)Skin conditioning (CosIng functional class)

    This is a skin-conditioning ingredient that also acts as an antioxidant, helping protect the formula from oxygen. It leaves the skin feeling conditioned.

  • Caffeine

    Fragrance ingredient (scent)Skin conditioning (CosIng functional class)

    Here it works as a skin-conditioning ingredient and contributes to fragrance and scent. It helps condition skin and adds to how the product smells.

  • Niacinamide

    Smoothing (CosIng functional class)

    An ingredient that smooths the skin's surface. In practice, it helps the product leave skin feeling even.

  • Salicylic Acid

    Anti-seborrheic (CosIng functional class)Fragrance ingredient (scent)Hair conditioning (CosIng functional class)Keratolytic (CosIng functional class)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)Restricted in the EU

    This is a multi-tasking acid that conditions skin and hair, works as a preservative to keep the formula from spoiling, and lends a scent. It also acts as a keratolytic, meaning it helps loosen and shed surface skin cells, and helps manage oiliness.

  • Linoleic Acid

    Antistatic (reduces static)Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

    A fatty acid that does several jobs here: it cleanses, conditions skin and hair, and softens and smooths skin feel. As a cleansing agent it helps lift away dirt and oil, and it also reduces static in hair.

  • Tocopherol

    Antioxidant (slows the formula oxidizing)Fragrance ingredient (scent)Occlusive (CosIng functional class)Skin conditioning (CosIng functional class)

    Tocopherol is a form of vitamin E used as an antioxidant, which helps keep the formula from going off. It also conditions skin and forms a thin surface layer that slows moisture loss. You may see it listed simply as vitamin E.

  • Lactoperoxidase

    Light stabilizer (protects the formula from light)

    This is an enzyme that acts as a light stabilizer. It helps keep the formula from breaking down when exposed to light, so the product stays consistent.

    listed as “Myeloperoxidase”

  • Glucose Oxidase

    Light stabilizer (protects the formula from light)

    Glucose Oxidase is a light stabilizer. It helps the product hold up when exposed to light, keeping the formula from breaking down.

  • No general role is recorded for this ingredient in the inventory we hold. That is a gap in our record, not a statement about the ingredient.

  • Glycyrrhetinic Acid

    Skin conditioning (CosIng functional class)

    Glycyrrhetinic Acid is a skin-conditioning ingredient. It works on the surface to keep skin feeling soft and smooth.

    listed as “Enoxolone”

  • Cholesterol

    Emollient (softens and smooths skin)Light stabilizer (protects the formula from light)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)Viscosity control (thickens or thins the formula)

    Cholesterol is a multitasker that softens and smooths the skin feel while helping oil and water mix. It also adjusts the product's thickness and helps keep the formula stable in light. On a label it can appear simply as cholesterol.

  • Jojoba Esters

    Emollient (softens and smooths skin)Moisturizing (CosIng functional class)Skin conditioning (CosIng functional class)Soothing (CosIng functional class)

    A skin-conditioning ingredient that softens and smooths, adds moisture, and has a soothing effect. In practice it helps the product feel comfortable and keeps skin from feeling dry.

    listed as “Hydrogenated Jojoba Oil, Randomized”

  • Glucose

    Humectant (holds moisture)

    Glucose draws in and holds moisture. That helps keep the product and skin from drying out.

    listed as “Anhydrous Dextrose”

  • Dimethicone/Vinyl Dimethicone Crosspolymer

    Skin conditioning (CosIng functional class)Viscosity control (thickens or thins the formula)

    A silicone elastomer that softens and smooths skin feel and adjusts the thickness of the product. In practice it gives a silky, cushioned texture.

    listed as “Dimethicone/Vinyl Dimethicone Crosspolymer (Soft Particle)”

  • Laureth-7

    Surfactant (cleanses or mixes oil and water)

    Laureth-7 is a cleansing and emulsifying agent, meaning it helps oil and water mix. In practice it keeps the formula blended and helps lift away dirt and oil.

  • Trimethylsiloxysilicate

    Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)

    A silicone-based ingredient that conditions and softens skin. It also cuts down foaming during mixing, keeping the formula from getting bubbly.

    listed as “Trimethylsiloxysilicate (M/Q 0.6-0.8)”

  • Sorbitan Sesquioleate

    Surfactant (cleanses or mixes oil and water)

    An emulsifier that helps oil and water stay mixed. It keeps the watery and oily parts from splitting apart, holding the formula together.

  • No general role is recorded for this ingredient in the inventory we hold. That is a gap in our record, not a statement about the ingredient.

  • Xanthan Gum

    Binder (holds the formula together)Emulsion stabilizer (keeps oil and water mixed)Gel forming (sets the formula into a gel)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)Viscosity control (thickens or thins the formula)

    A thickener that adjusts how thick the product is and forms a gel-like texture. It keeps oil and water mixed and stops the blend from separating, giving a stable, even feel.

  • Silica

    Abrasive (physically scrubs)Absorbent (takes up oil or water)Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Opacifier (makes the formula less see-through)Viscosity control (thickens or thins the formula)

    Silica is a fine mineral powder that soaks up excess moisture and oil, and adjusts how thick the product feels. It keeps powders from clumping, adds bulk, and can make a formula look more opaque. Its chemical name is silicon dioxide.

    listed as “Silicon Dioxide”

  • Caprylyl Glycol

    Deodorant (masks or reduces odor)Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Preservative (inhibits microbial growth)Skin conditioning (CosIng functional class)

    A multi-tasker that conditions skin and hair and acts as a deodorant. As an emollient it softens and smooths, leaving skin feeling conditioned.

  • Dimethicone Peg-15 Acetate

    Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

    A silicone-based ingredient that helps oil and water mix and cleanses. It keeps the different parts of the formula blended while also conditioning the skin and hair for a smoother feel.

  • Disteardimonium Hectorite

    Light stabilizer (protects the formula from light)Viscosity control (thickens or thins the formula)

    A thickener that adjusts how thick or thin the product is. It also works as a light stabilizer, helping the formula hold up against light exposure.

  • Triethoxycaprylylsilane

    Binder (holds the formula together)

    A binding ingredient that helps hold the parts of the formula together. It is often used to coat and bind powders in a mix.

  • Alumina

    Abrasive (physically scrubs)Absorbent (takes up oil or water)Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Opacifier (makes the formula less see-through)Viscosity control (thickens or thins the formula)

    A mineral powder that soaks up excess oil, adjusts thickness, and keeps the formula from clumping. It also adds opacity and can act as a mild scrubbing agent, giving the product body and a smoother texture.

    listed as “Aluminum Oxide”

  • Propylene Carbonate

    Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

    A solvent that dissolves and carries other ingredients, and it also adjusts the product's thickness. In practice it helps blend the formula and fine-tune its texture.

  • Dipropylene Glycol

    Fragrance ingredient (scent)Humectant (holds moisture)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

    A solvent that dissolves other ingredients and adjusts how thick the product is. It also adds fragrance. This helps the formula blend and spread evenly.

  • Sodium Chloride

    Bulking agent (adds volume)Fragrance ingredient (scent)Oral care (CosIng functional class)Viscosity control (thickens or thins the formula)

    Common table salt, used here mainly to adjust the thickness of the formula. It can also act as a bulking agent to add body, and shows up in oral care products. On labels it's simply salt.

  • Sodium Hydroxide

    Buffering (holds the formula at a set acidity)Denaturant (makes alcohol undrinkable)Restricted in the EU

    Sodium Hydroxide is a strongly alkaline ingredient used in tiny amounts to fine-tune a formula's acidity (buffering). This keeps the product's pH steady. It can also act as a denaturant, altering another substance so it stays fit for use in cosmetics rather than being consumed.

  • Citric Acid

    Buffering (holds the formula at a set acidity)Chelating (binds metal ions in the formula)Fragrance ingredient (scent)

    Citric Acid is a mild acid used to fine-tune a formula's pH. It keeps the acidity steady (buffering), binds trace metals that would spoil the formula (chelating), and can add a scent note.

    listed as “Citric Acid Monohydrate”

  • Potassium Phosphate

    Buffering (holds the formula at a set acidity)

    This is a buffering agent, meaning it keeps the product's acidity steady. Holding the pH level stable helps the formula stay consistent over time.

    listed as “Potassium Phosphate, Unspecified Form”

  • Tetrasodium EDTA

    Chelating (binds metal ions in the formula)

    Tetrasodium EDTA is a chelating agent. It binds trace metals that would otherwise spoil the formula.

    listed as “Edetate Sodium”

  • Sodium Citrate

    Buffering (holds the formula at a set acidity)Chelating (binds metal ions in the formula)Fragrance ingredient (scent)

    A buffering agent that keeps the product's acidity steady. It also binds trace metals that would otherwise spoil the formula.

    listed as “Sodium Citrate, Unspecified Form”

  • Potassium Sorbate

    Fragrance ingredient (scent)Preservative (inhibits microbial growth)

    A salt used mainly as a preservative to keep the product from spoiling. It also contributes to fragrance. In practice, it helps the formula stay stable over time.

  • Phenoxyethanol

    Preservative (inhibits microbial growth)

    This is a preservative that fights microbes. It helps keep the product from spoiling over time.

  • Mica

    Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Colorant (adds color)Opacifier (makes the formula less see-through)

    Mica is a mineral used to add color and to make the product look opaque rather than see-through. It also keeps powders from clumping and adds bulk to the formula.

  • Iron Oxides

    Colorant (adds color)

    A colorant that gives the product its shade. On labels it can also appear as CI 77491, CI 77492, or CI 77499.

    listed as “Ferric Oxide Red”

  • Water

    Antiplaque (CosIng functional class)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

    The base liquid that most of the other ingredients dissolve or spread into. It carries the formula and helps condition the skin surface.

  • Dimethicone

    Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)Skin protecting (CosIng functional class)

    A silicone that softens and smooths skin feel and forms a protective layer on the surface. It also cuts down foam during production, keeping the formula settled.

  • Dimethicone Peg-10 Phosphate

    Surfactant (cleanses or mixes oil and water)

    This is a silicone-based ingredient that helps oil and water mix and works as a cleansing agent. In practice it keeps the water and oil parts blended and helps lift away dirt and oils.

  • Butylene Glycol

    Fragrance ingredient (scent)Humectant (holds moisture)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

    A multitasking liquid that acts as a humectant, solvent, and thickness adjuster, and carries a scent role. It draws in and holds moisture, dissolves other ingredients, and helps set the product's texture.

  • Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer

    Viscosity control (thickens or thins the formula)

    This is a silicone-based ingredient that adjusts the product's thickness. It helps give the formula the right texture and body.

  • Phenyl Trimethicone

    Antifoaming (stops the formula foaming)Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Occlusive (CosIng functional class)Skin conditioning (CosIng functional class)

    This is a silicone that conditions skin and hair and cuts down on foaming. As an occlusive it forms a layer that helps hold in moisture, and it gives a smooth feel.

  • Isododecane

    Emollient (softens and smooths skin)Fragrance ingredient (scent)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

    A light fluid that acts as a solvent, keeping other ingredients dissolved and evenly blended. It also softens skin feel and can carry fragrance. It leaves a quick, non-heavy finish as it spreads.

  • Butyloctyl Salicylate

    Emollient (softens and smooths skin)Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)Solvent (dissolves other ingredients)

    A liquid that conditions skin and hair and acts as a solvent. It softens skin feel and helps dissolve and spread other ingredients in the mix.

  • Isodecyl Isononanoate

    Antistatic (reduces static)Emollient (softens and smooths skin)Skin conditioning (CosIng functional class)

    This is an emollient that softens and smooths skin feel, giving a lighter glide. It also works as an antistatic, cutting down static so the product sits more evenly.

  • Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone

    Hair conditioning (CosIng functional class)Skin conditioning (CosIng functional class)Surfactant (cleanses or mixes oil and water)

    This is a silicone-based ingredient that helps oil and water mix and can also do cleansing work. It conditions skin and hair, giving a smooth feel. In a formula it keeps the oil and water parts blended together.

  • Alcohol

    Antifoaming (stops the formula foaming)Astringent (CosIng functional class)Fragrance ingredient (scent)Preservative (inhibits microbial growth)Solvent (dissolves other ingredients)Viscosity control (thickens or thins the formula)

    Alcohol is ethyl alcohol used as a solvent to dissolve other ingredients and thin the formula. It also cuts foam, tightens skin as an astringent, and adjusts thickness. It appears on labels simply as alcohol or ethanol.

  • Dimethicone/Vinyl Dimethicone Crosspolymer

    Skin conditioning (CosIng functional class)Viscosity control (thickens or thins the formula)

    A silicone elastomer that softens and smooths skin feel and adjusts the thickness of the product. In practice it gives a silky, cushioned texture.

    listed as “Dimethicone/Vinyl Dimethicone Crosspolymer (Hard Particle)”

  • Hydrated Silica

    Abrasive (physically scrubs)Absorbent (takes up oil or water)Anticaking (keeps powder free-flowing)Bulking agent (adds volume)Opacifier (makes the formula less see-through)Viscosity control (thickens or thins the formula)

    Hydrated Silica is a form of silica, a mineral made of silicon and oxygen, that contains bound water. In cosmetics it is used as an abrasive, thickener, or absorbent, and can help control texture or matte appearance. It is the same basic mineral family as sand and quartz in a processed, powdered form.

  • Ascorbyl Glucoside

    Antioxidant (slows the formula oxidizing)

    Ascorbyl Glucoside is a form of vitamin C used purely as an antioxidant. That means it helps keep the formula from spoiling as it's exposed to air.

  • Tetrahexyldecyl Ascorbate

    Antioxidant (slows the formula oxidizing)Skin conditioning (CosIng functional class)

    This is an antioxidant and skin-conditioning ingredient, a form of vitamin C. As an antioxidant it helps keep the formula from going off, and it softens the skin feel.

  • Magnesium Ascorbyl Phosphate

    Antioxidant (slows the formula oxidizing)Skin conditioning (CosIng functional class)

    Magnesium Ascorbyl Phosphate is a form of vitamin C that works as an antioxidant and conditions skin. It helps keep the product from spoiling as it meets air, and softens and smooths skin feel.

  • Sodium Hyaluronate

    Humectant (holds moisture)Skin conditioning (CosIng functional class)

    A moisture-grabbing ingredient that draws in and holds water. That keeps skin conditioned and helps it feel supple. It's the salt form of hyaluronic acid.

    listed as “Hyaluronate Sodium”

  • Tocopheryl Acetate

    Antioxidant (slows the formula oxidizing)Skin conditioning (CosIng functional class)

    Tocopheryl Acetate is a form of vitamin E that acts as an antioxidant, helping keep the formula from going off. It also conditions the skin, softening its feel.

    listed as “.Alpha.-Tocopherol Acetate”

  • Laminaria Saccharina Extract

    Skin protecting (CosIng functional class)

    An extract from the seaweed Laminaria saccharina that works as a skin protector. It helps shield the skin's surface.

    listed as “Saccharina Latissima”

  • Polygala Senega Root Extract

    Refreshing (CosIng functional class)Skin conditioning (CosIng functional class)

    This is a root extract used to refresh and condition the skin. It gives a fresh feel and helps keep skin soft and in good condition.

    listed as “Polygala Senega Root”

  • Berberis Vulgaris Root Extract

    Preservative (inhibits microbial growth)

    This is an extract of barberry root bark, included for its antimicrobial role. That means it helps keep the formula from spoiling as microbes grow.

    listed as “Berberis Vulgaris Root Bark”

Checking this against your own list

SPF Scout's Personal Ingredient Check runs in the app, on your device. This page cannot see a personal avoidance list. Your selections are stored on your phone and are never sent to this website. There is nowhere on our side for them to go.

In the app you choose the ingredients you already avoid, and every entry in this declaration that matches one of them is shown to you with the alias path that produced the match.

This comparison does not predict whether your skin will react.

Source quality

Source
DailyMed drug label
Source record
https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=884abba1-891d-4c3c-b203-38a5a8a57756
Retrieved
22 September 2026
Market
United States
Version
v1 of this U.S. formulation
Source tier
Official label document (not independently verified by us)
Entries recorded
64
Record checksum
sha256:99545a54e2ad131d77e5b3cabf0184d4d3d67d6d029ce664adc37d8d6ec86ff6

Always compare this record with your current package.

Report an incorrect formulation